Description
Alloy Hard Boost Pipework Kit for PD170 (BMN / BMR) 2.0 TDI Engines
Fits ALL Mk5 Platform VW / Audi / Seat and Skoda Vehicles with the PD170 (BMN / BMR) Engine
- 57mm alloy pipe(s) to fit perfectly in place of the stock pipe(s)
-
Replaces unnecessary joints which can cause boost leaks
-
High quality 3ply silicone hoses
-
Stainless T-Bolt clamps for secure fitting
-
Made in UK
-
Use with standard or S3 intercoolers
There are a number of different options available with this kit, dependent on your Turbo and Intercooler setup. Please select the options above to get the final price for your kit
IMPORTANT! On vehicles retaining the stock turbocharger the original turbo clip and aluminimum pipe over the gearbox is retained
Dependant of the options selected, this kit consists of:
Darkside Developments Alloy Pipe with MAP Sensor Boss (ASV to Intercooler)
Darkside Developments Alloy Pipe (Turbocharger to Intercooler) (Only with GTB Turbochargers)
Darkside Developments Clip Connector Adapters
Darkside Developments Silicone Hoses
Viton O-Ring Seals on Clip Connector Adapters
Stainless Steel Clamps
If you decided to upgrade from the Standard PPD170 Intercooler to the S3 Intercooler at a later date, the kit is exactly the same, you would just no longer need the Clip Connector Adapters
The Audi S3 Intercooler is available in our shop, please click here
We also offer an Upgrade Intercooler for the PPD170's which has 70mm End Tanks instead of 57mm, This can be found here
If you require any assistance or further information regarding these options, please get in touch
All the silicones included in the kit may require slight Trimming to suit your set up, These are left long to take in to consideration tolerances between cars
We now offer a range of Silicone Colours - Black Silicones are in stock where as the other colours are special order and may take up to 1 week to dispatch
(Sometimes the turbo clip can be quite tight to push in due the tolerances we have them machined to. We have found that warming the turbo compressor housing with a heat gun helps the clip push in)
MADE IN THE UK