A3 inc Quattro Mk2 - 8P - 2003-2012

Front Upper Engine Mount Insert - PFF85-531PFF85-531 is an insert designed to fill the voids of the original bush. Please check voids of your original mount are the same as the image shown for correct fitment. Does not fit Audi TTRS or RS3 modelsDiagram...

Front Upper Engine Mount Insert - PFF85-532BLKDesigned to fill the voiding in the OE rubber mount, it smooths out gear changes by stiffening and supporting the often perished rubber bush, which is common for failure on tuned vehicles. This will provide a...

Front Upper Engine Mount Insert - PFF85-532Designed to fill the voiding in the OE rubber mount, it smooths out gear changes by stiffening and supporting the often perished rubber bush, which is common for failure on tuned vehicles. This will provide a...

Front Upper Engine Mount Insert - PFF85-531BLKPFF85-531BLK is an insert designed to fill the voids of the original bush. Please check voids of your original mount are the same as the image shown for correct fitment. Does not fit Audi TTRS or RS3...

Front Steering Rack Mounting Bush - PFF85-533Diagram Reference33CompoundRoad SeriesLocation on VehicleFrontAdjustmentFixedIncluded in the Kit:1 x PFF85-533 - Steering Rack Mounting BushReplaces Part Numbers1K0498884 - 1K0 498 884To fit the following...

Front Steering Rack Mounting Bush - PFF85-533BLKDiagram Reference33CompoundBlack SeriesLocation on VehicleFrontAdjustmentFixedIncluded in the Kit:1 x PFF85-533BLK - Steering Rack Mounting BushReplaces Part Numbers1K0498884 - 1K0 498 884To fit the...

PowerAlign Wheel Mounting Guide Pin - PF99-514-15Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy...

Jacking Point Insert - PF3-1663PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points...

Jacking Point Insert Kit of 4 - PF3-1663KPFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift...

Jack Pad Adaptor - 80mm Diameter - PF3-1661PF3-1661 is a polyurethane jack pad to fit around and protect the sill, designed to help lift stability and location, whilst protecting the underside of your vehicle.Size80mm DiameterCompoundRoad SeriesLocation...

Handling Pack - PF85K-1006Fits Petrol models mid 2008 onwardsCompoundRoad SeriesIncluded in the Kit:2 x PFF85-501 - Front Wishbone Front Bush2 x PFF85-502 - Front Wishbone Rear Bush2 x PFF85-704 - Lower Engine Mount Insert (Large) Petrol/Tuned Diesel1 x...

Handling Pack - PF85K-1005Fits Petrol models before mid 2008CompoundRoad SeriesIncluded in the Kit:2 x PFF85-501 - Front Wishbone Front Bush2 x PFF85-502 - Front Wishbone Rear Bush2 x PFF85-504 - Lower Engine Mount Insert (Large) Petrol/Tuned Diesel1 x...