Bora 2WD - 1J - 1999-2005

Front Wishbone Rear Bush - 23mm arm width - 2 x PFF85-410HIf fitting this bush to A3 MK1 2WD or Seat Leon & Cupra MK1, it only fits pressed steel genuine OE arms 23mm in widthSize23mm arm widthDiagram Reference2CompoundHeritageLocation on...

Front Engine Mount Dog Bone (Diesel) - PFF85-420RHA small increase in NVH, usually at idle, should be expected when stiffening the connecting mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH...

Front Anti Roll Bar Mount 23mm - 2 x PFF85-411-23HPlease check anti roll bar diameter before orderingSize23mmDiagram Reference3CompoundHeritageLocation on VehicleFrontAdjustmentFixedIncluded in the Kit:2 x PFF85-411-23H - Front Anti Roll Bar Mount...

Front Anti Roll Bar Link Bush Kit - 2 x PFF85-413HDiagram Reference4CompoundHeritageLocation on VehicleFrontAdjustmentFixedIncluded in the Kit:2 x PFF85-413H - Front Anti Roll Bar Link Bush KitReplaces Part Numbers1J0411315K - 1J0411315 K - 1J0 411 315...

Front Upper Engine Mount Insert (Diesel) - PFF85-440RHPFF85-440R uses our softest Grey 65A material, specifically designed to minimise NVH transmission. Recommended for unmodified Diesel models or for drivers who want a subtle improvement in driving...

Front Upper Engine Mount Insert - PFF85-440BLKPFF85-440BLK uses our stiffest Black Series 95A material, providing a no-compromise performance option for track-focused builds. A small increase in NVH, usually at idle, should be expected when stiffening...

Front Upper Engine Mount Insert - PFF85-440PFF85-440 uses our Yellow 70A durometer material, providing an excellent balance of strength and compliance for improved performance, whilst limiting NVH transmission into the cabin. This part is recommended for...

Front Upper Engine Mount Insert (Diesel) - PFF85-440RPFF85-440R uses our softest Red 65A material, specifically designed to minimise NVH transmission. Recommended for unmodified Diesel models or for drivers who want a subtle improvement in driving feel,...

Front Upper Gearbox Mount Insert - PFF85-441BLKPFF85-441BLK uses our stiffest Black Series 95A material, providing a no-compromise performance option for track-focused builds. A small increase in NVH, usually at idle, should be expected when stiffening...

Front Upper Gearbox Mount Insert (Diesel) - PFF85-441RPFF85-441R uses our softest Red 65A material, specifically designed to minimise NVH transmission. Recommended for unmodified Diesel models or for drivers who want a subtle improvement in driving feel,...

Front Upper Gearbox Mount Insert - PFF85-441PFF85-441 uses our Yellow 70A durometer material, providing an excellent balance of strength and compliance for improved performance, whilst limiting NVH transmission into the cabin. This part is recommended...

Jacking Point Insert - PF3-1663PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points...