The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site with all features activated.

Darkside Billet Single Mass Flywheel (SMF) & Clutch Kit for VW Audi 2.0 Bi-Turbo, 2.5L TDI & TFSI - 0A5 / 0A6 Gearbox

SKU:
DSD8520.1
Shipping:
Calculated at Checkout
  • Darkside Billet Single Mass Flywheel (SMF) & Clutch Kit for VW Audi 2.0 Bi-Turbo, 2.5L TDI & TFSI - 0A5 / 0A6 Gearbox
  • Darkside Billet Single Mass Flywheel (SMF) & Clutch Kit for VW Audi 2.0 Bi-Turbo, 2.5L TDI & TFSI - 0A5 / 0A6 Gearbox
  • Darkside Billet Single Mass Flywheel (SMF) & Clutch Kit for VW Audi 2.0 Bi-Turbo, 2.5L TDI & TFSI - 0A5 / 0A6 Gearbox
  • Darkside Billet Single Mass Flywheel (SMF) & Clutch Kit for VW Audi 2.0 Bi-Turbo, 2.5L TDI & TFSI - 0A5 / 0A6 Gearbox
£900.00

Description

Darkside Billet Single Mass Flywheel and Sachs Race Clutch Kit

Fits VW / Audi 2.5L vehicles fitted with 0A5 / 0A6 Gearbox

  • Fits in place of the stock Dual Mass Flywheel and Clutch
  • Darkside Billet CNC machined Solid 10Kg Flywheel
  • Sachs Race Pressure Plate for increased hold
  • Sachs Race Clutch Disc for superior strength
  • Sachs Release Bearing / CSC

 Organic Kit (Daily Use) - 400Ft/Lbs  /  540Nm

 This kit consists of:
Darkside Billet CNC machined 240mm Single Mass Flywheel - 10KG

SACHS SRE 240mm Organic Clutch Disc
SACHS SRE Upgraded Pressure Plate
 Flywheel and Pressure Plate Bolts
SACHS Release Bearing / CSC
 

Sintered Paddle Kit (Fast Road / Track Use) 588Ft/Lbs+  /  610Nm+

This kit consists of:
Darkside Billet CNC machined 240mm Single Mass Flywheel - 10KG

SACHS SRE 240mm Sintered 4 Paddle Clutch Disc
SACHS SRE Upgraded Pressure Plate
 Flywheel and Pressure Plate Bolts
SACHS Release Bearing / CSC


The Organic Disc will give a stock like bite, with a heavier pedal feel due to the upgraded Pressure Plate. This makes it a good Daily use setup as well as occasional Track use

The Sintered disc is only recommended for use on a Fast Road, Race or Track car due to the increased grab caused by the sintered facings, as this makes driving in traffic more difficult and increases wear rate

Both kits are easily rebuilt when the Clutch Facings are worn out, meaning you will not require a new Flywheel or Pressure Plate. The expected life is 50 - 60K Miles for the Organic Kit, and 20 - 30k for the Sintered Kit

This fits the following Engine Codes (can be found on a sticker on the Cam Belt Cover or in the Boot):

Audi TT  -  CEPB / CEPA 2.5 TFSI

Volkswagen Transporter - BLJ, AXE, BPC, CFCA,

Volkswagen Tiguan - CBAA / CFFA / CBAB / CFFB 140 (4motion only)

 

  PLEASE NOTE - As with most of the Single Mass Flywheel Kits, there will be some noise at low RPMs and at idle. This is completely normal and will not damage your gearbox or engine

 6-speed-clutch-fitting-banner-2.jpg

View AllClose