Description
Mk5 Platform AP Racing Pro 5000R Front Caliper Conversion Kit
Darkside Mk5 Platform Front AP Racing Pro CP9668 5000R Brake Caliper Conversion Kit with BTCC 368mm x 36mm Brake Discs This Brake Setup is the one used on our Mk5 Golf Race Car and we have found that it is one of the best setups we have used / tested This kit is supplied with everything required to perform this conversion apart from the Calipers and Brake Pads, you can find links to these below in this listingBrake Disc / Rotors Specifications:
In used condition but only have approximately 1mm of wear evident72 'S' Type Vanes
12 Hole
240mm PCD
368mm x 36mm x 72
Brake Bell Specifications:
CNC Machined from Billet AluminiumMade in the UK
PCD - 5x112
Centre Bore - 66.6mm (this will be supplied with a 5mm Spacer with reducing spiggot / CB to 57.1mm)
Please Note:
You must have suitable Wheel Size and Design in order for this Brake Kit to fit. A minimum of 18" wheel size is reccomended, however, please ensure the wheel design allows enough clearance for the calipersThis Kit Consists of the Following:
2x AP Racing Pro CP9668 5000 R 6 Pot Calipers2x CNC Machined Aluminium Brake Caliper Mounting Brackets
2x Aluminium Brake Bell fo 368mm Brake Discs / Rotors
2x Aluminium Brake Bell Spacer
2x AP Racing Brake Rotor Bobbin Kit
2x Part Worn 368mm BTCC Brake Discs / Rotors
2x Braided Brake Lines
This Kit does not come with brake pads, however, we have them listed on our website here
Pagid RSL29 Front Brake Pads
Replacement BTCC Brake Discs:
https://www.darksidedevelopments.co.uk/products/368mm-x-36mm-btcc-j-hook-brake-disc-rotor.html
We also have available a Dry-Break Bleed system available for these calipers, find this here:
This Kit will fit the following MK5 Platform Vehicles:
VW Caddy
VW Eos
VW Golf
VW Jetta
VW Passat B6
VW Touran
Audi A3
Skoda Octavia
Seat Allhambra
Seat Altea