null

Hard Pipework Kit for 2.0 16v TDI PD140 (BKD / BKP) Engine

SKU:
DSD1147.4-BLK
Shipping:
Calculated at Checkout
  • Hard Pipework Kit for 2.0 16v TDI PD140 (BKD / BKP) Engine
  • Silicone Colours
  • Hard Pipework Kit for 2.0 16v TDI PD140 (BKD / BKP) Engine
  • Hard Pipework Kit for 2.0 16v TDI PD140 (BKD / BKP) Engine
  • Silicone Colours
  • Hard Pipework Kit for 2.0 16v TDI PD140 (BKD / BKP) Engine

Coloured Silicones are custom order and may take up to 10 - 14 working days to dispatch. Black Silicones are usually in stock.

£318.00 - £432.00 (Inc. VAT)
£265.00 - £360.00 (Ex. VAT)

Description

Alloy Hard Boost Pipework Kit for PD140 (BKD / BKP Passat) 2.0 TDI Engines

 Fits ALL Mk5 Platform VW / Audi / Seat and Skoda Vehicles with the PD140 (BKD / BKP) Engine

  • 57mm Alloy pipes to fit perfectly in place of the stock pipes
  • Replaces unnecessary joints which can cause boost leaks
  • High quality 3ply silicone hoses
  • Stainless T-Bolt clamps for secure fitting
  • Made in UK
  • Use with standard or S3 intercooler

 This Intercooler Kit replaces the standard rubber and plastic hoses with the clip connectors that can cause boost leaks. The Alloy Pipe Kit on its own eliminates some of these problematic connectors. Combined with an S3 Intercooler even more clip connectors are removed and the plastic end tanks are replaced with the S3's alloy tanks

These hard pipes will also fit the BKP PD140 VW Passat and are a direct replacement for the standard boost pipes

There are a number of different options available with this kit, dependent on your Turbo and Intercooler setup. Please select the options above to get the final price for your kit
Dependant of the options selected, this kit consists of:

Darkside Developments Alloy Pipe Kit with MAP Sensor Boss 
Darkside Developments Clip Connector Adapters 
Darkside Developments Silicone Hoses
 Viton O-Ring Seals on Clip Connector Adapters
Stainless Steel Clamps

Turbo Options
Standard / Hybrid Turbo - Turbo Clip Connector Adapter and Silicone Hose
GTB Turbo Kit - 90 Degree Silicone Hose
Intercooler Options
Retain Standard BKD Intercooler - 2 Intercooler Clip Connector Adapters and Silicone Hoses
S3 Intercooler - Silicone Hoses
 
 If you decided to upgrade from the Standard BKD Intercooler to the S3 Intercooler at a later date, the kit is exactly the same, you would just no longer need the Clip Connector Adapters. This is also the same if you swap from the Stock/Hybrid Turbocharger to our GTB Turbo Kit
 
The Audi S3 Intercooler is available in our shop, please click here
 
We also offer an Upgrade Intercooler for the PPD170's which has 70mm End Tanks instead of 57mm, This can be found here
 
 
 If you require any assistance or further information regarding these options, please get in touch
 
 
All the silicones included in the kit may require slight Trimming to suit your set up, These are left long to take in to consideration tolerances between cars
 
 
We now offer a range of Silicone Colours - Black Silicones are in stock where as the other colours are special order and may take up to 1 week to dispatch
 

(Sometimes the turbo clip can be quite tight to push in due the tolerances we have them machined to. We have found that warming the turbo compressor housing with a heat gun helps the clip push in)

 
 
MADE IN THE UK

 

View AllClose
SUBSCRIBE