MTS Technik Coilover Kit / Lowering Kit for Volkswagen Caddy 2K Mk3 & Mk4

MTS Technik TUV Approved Volkswagen Caddy 2K Lowering Kit / Coilover Kit

Suspension components characterized by increased corrosion resistance and made of the highest quality materials

The use of twin-tube technology guarantees stable shock absorber performance

Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work

Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height

Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment

Adjustable Shock Absorbers protected by a double layer of gold zinc and adjustments made of anodized aluminum guaranteeing increased corrosion resistance

Coilover springs made by Eibach, the world leader in the sport springs industry

Lowering Front Axle:

35 - 90mm

Lowering Rear Axle:

35 - 90mm

Fitment Notes:

Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).

Not for 4x4.

Only for vehicles equipped with a one-piece leaf spring on the rear axle. If the vehicle is equipped with a twin leaf spring on the rear axle a one-piece leaf spring has to be purchased seperately (while used in a Caddy - use VW part no. for leaf spring spring 2K0511151N, while used in a Caddy Maxi use VW part no. for leaf spring spring 2K3511151E).

If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.

During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.

Installation of the rear axle adjustment must be carried out in accordance with the instruction.

Front and rear axle height adjustable (threaded shock absorber housing on the front, provided adjustment plates + shock absorbers on the rear axle).

Cars with two-leaf spring on the rear axle should be swapped to on-leaf spring. VW Caddy 3 (-05/2015): 2K5511151N, VW Caddy 4 (05/2015-): 2K5511151AA, VW Caddy MAXI: 2K3511151E.

This Kit Consists of:

2x Front Coilover Struts
2x Front Springs
2x Rear Dampers
1x Rear Shackle Lowering Kit - Adjustable for rear wheel centralisation

We also have new front top strut mounts & ARB drop links listed here:

Top Strut Mounts:

https://www.darksidedevelopments.co.uk/products/front-suspension-top-mount-for-mk5-golf-platform-vw-caddy-mk3-mk4.html

Front ARB Drop Links:

https://www.darksidedevelopments.co.uk/products/vw-mk5-mk6-vw-caddy-front-anti-roll-bar-drop-link-5q0411315a.html

Rear ARB Drop Link:

https://www.darksidedevelopments.co.uk/products/vw-caddy-rear-anti-roll-bar-drop-link.html

This Kit will fit the following Vehicles:

Volkswagen Caddy 2K - Mk3 / Mk4