Turbochargers and Parts

NXS Motorsports Signature Series Manual Boost Controller These units incorporate a stainless steel spring and stainless steel ball bearing. This combination allows your engine to realize gains of up to 30 psi while being able to fine tune your desired...

Brand New GTB1756VK CHRA (Center Housing Rotating Assembly) with Standard Wheel Ideal for turbocharger rebuild Balanced assembly ready to install Standard Balance - (0.65G, 0 – 90,000rpm / 2.00G, 90,000 – 132,000rpm) This CHRA...

Brand New GTB2260VK CHRA (Center Housing Rotating Assembly) with Standard Wheel Ideal for turbocharger rebuild Balanced assembly ready to install Standard Balance - (0.65G, 0 – 90,000rpm / 2.00G, 90,000 – 132,000rpm) This CHRA assembly...

GTB2260VK Nozzle Ring Assembly Ideal for turbocharger rebuild We can also supply the following parts for a full rebuild:GTB2260VK CHRA with Billet CoreNozzle Ring CageSteel Turbine Housing Gasket VNT Nozzle Ring BoltGTB Gas Seal Ring Compatible...

GTB2260VK Nozzle Ring Assembly Ideal for turbocharger rebuild We can also supply the following parts for a full rebuild:GTB1756VK CHRANozzle Ring CageSteel Turbine Housing Gasket VNT Nozzle Ring BoltGTB Gas Seal Ring Compatible with the...

Darkside Oil Drain Fitting Fits Garrett Turbos with the 38mm Oil Drains Fits Garrett Turbos with the 38mm Oil Drainers Perfect for creating your own oil drain / return line to be used with a 0.5" hose Made in the UK  Overall Length -...

GTB2260VK Nozzle Ring Cage Ideal for turbocharger rebuild We can also supply the following parts for a full rebuild:GTB2260VK CHRA with Billet CoreNozzle Ring AssemblySteel Turbine Housing Gasket VNT Nozzle Ring BoltGTB Gas Seal Ring Compatible...

OE - M8 12mm Exhaust Nut (x1) Special VW Size Exhaust Nut M8 Thread with 12mm Across Flats used on the Exhaust Manifold Studs and Downpipe Studs

Tubular Manifold Coating Service (For Darkside Manifolds) This service is to ceramic coat (1) Darkside Developments Tubular ManifoldIf you are supplying an old manifold additional return shipping will need to be added:This service will include:Manifold...

Darkside Alloy Turbo Inlet Pipe (TIP) for LHD Budget Turbo Kit Replacement for the Standard Plastic / Alloy TIP Pipe found on the VW Golf Mk4 Platform Vehicle. This is needed when fitting our LHD Budget Turbo Kit:https://www.darksidedevelopments.co...

Darkside Custom Alloy TIP Pipe for Ibiza / Polo / Fabia Replacement for the Standard Plastic / Alloy TIP Pipe found on the Ibiza Mk4 / VW Polo and Skoda Fabia These are 2.5" to clear the master cylinder then 80mm for the TIP To Airbox / Paper Cone Filter...

Darkside Custom Alloy TIP Pipe for Ibiza / Polo / Fabia Replacement for the Standard Plastic / Alloy TIP Pipe found on the Ibiza Mk4 / VW Polo and Skoda Fabia These are 2.5" to clear the master cylinder then 80mm for the TIP To Airbox / Paper Cone Filter...