Golf Mk4 2WD - 1J - 1997-2004

Jacking Point Insert - PF3-1663PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points...

Jacking Point Insert Kit of 4 - PF3-1663KPFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift...

Front Anti Roll Bar Link Bush Kit - 2 x PFF85-413 - 4Fits plastic link rods only. Not for link rods with ball joints on the endsDiagram Reference4CompoundRoad SeriesLocation on VehicleFrontAdjustmentFixedIncluded in the Kit:2 x PFF85-413 - Front Anti...

Front Anti Roll Bar Link Bush Kit - 2 x PFF85-413BLK - 4Fits plastic link rods only. Not for link rods with ball joints on the endsDiagram Reference4CompoundBlack SeriesLocation on VehicleFrontAdjustmentFixedIncluded in the Kit:2 x PFF85-413BLK - Front...

Front Wishbone Front Bush 30mm - 2 x PFF85-201HIf fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check...

Front Wishbone Front Bush 30mm - 2 x PFF85-201If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check...

Front Wishbone Front Bush 30mm Camber Adjustable - 2 x PFF85-201GBLKPFF85-201GBLK gives +/- 0.5 degrees of camber adjustment. It features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied),...

Front Wishbone Front Bush 30mm - 2 x PFF85-201BLKIf fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check...

Handling Pack - PF85K-1004This kit is suitable for Petrol vehicles onlyCompoundRoad SeriesIncluded in the Kit:2 x PFF85-201 - Front Wishbone Front Bush 30mm2 x PFF85-410 - Front Wishbone Rear Bush - 23mm arm width2 x PFR85-610 - 1 x PFF85-420 - Front...

PowerAlign Camber Bolt Kit (12mm x 60mm) - PFA100-12Kit contains 2 camber bolts, tab washers and nuts. Camber adjusting bolt to replace the original 12mm bolt. This fits 2 bolt hub to strut models only. Check bolt...

Front Wishbone Front Bush 30mm Camber Adjustable - 2 x PFF85-201GPFF85-201G gives +/- 0.5 degrees of camber adjustment. It features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), and...

Rear Beam Mounting Bush - 69mm - 2 x PFR85-610BLK - 5Fits 2WD models only. PFR85-415 has been superseded with PFR85-610Size69mmDiagram Reference5CompoundBlack SeriesLocation on VehicleRearAdjustmentFixedIncluded in the Kit:2 x PFR85-610BLK - Rear Beam...