Darkside 2.5" DPF Delete Downpipe for US SPEC 3.0 TDI Audi Q7 / VW Touareg

SKU:
DSD5255
Shipping:
Calculated at Checkout
  • Darkside 2.5" DPF Delete Downpipe for US SPEC 3.0 TDI Audi Q7 / VW Touareg
  • Darkside 2.5" DPF Delete Downpipe for US SPEC 3.0 TDI Audi Q7 / VW Touareg
  • Darkside 2.5" DPF Delete Downpipe for US SPEC 3.0 TDI Audi Q7 / VW Touareg
  • Darkside 2.5" DPF Delete Downpipe for US SPEC 3.0 TDI Audi Q7 / VW Touareg
  • Darkside 2.5" DPF Delete Downpipe for US SPEC 3.0 TDI Audi Q7 / VW Touareg
  • Darkside 2.5" DPF Delete Downpipe for US SPEC 3.0 TDI Audi Q7 / VW Touareg
£270.00
(Inc. VAT)
£225.00 (Ex. VAT)

Description

Darkside 2.5" DPF Delete Downpipe for US SPEC 3.0 TDI Audi Q7 / VW Touareg

2.5" Stainless Downpipe DPF Delete for US SPEC VW Touareg / Audi Q7 3.0 TDI

This 2.5" Stainless Steel Downpipe DPF Delete is a straight replacement to remove the factory Diesel Particulate Filter (DPF) on the 3.0 TDi VW Touareg / Audi Q7 / Porsche Cayenne

Our DPF Delete Pipe / De-Cat Pipe only removes the bottom CAT / DPF Canister

  • Increased performance and driveability
  • Made from 316 grade Aircraft-grade Stainless Steel
  • High Flow for maximum performance
  • Designed and made in the UK
  • This Kit Consists of:

    Darkside 2.5" DPF Delete Downpipe
    2x Gaskets (for either end of pipe)

    This Kit will fit the following US Spec Vehicles:

    Porsche Cayenne

    Audi Q7 - CATA (224) CCMA (239) CNRB (239) CLZB (245)

    VW Touareg - CASD (204) CATA (224) CNRB (239) CASA (240)

    Replaces Genuine VW Part Numbers:

    7L8254800N - 7L8254800 N - 7L8 254 800 N
    7L8254800NX - 7L8254800 NX - 7L8 254 800 NX

    Replaces Genuine Porsche Part Numbers:

    95811302360 - 958 113 023 60

    When buying the DPF Delete Pipe you will require a custom ECU Remap to erase any fault codes or engine management lights. We will not be responsible for any problems that may occur with any other tuners software

    Our DPF Delete Pipes are supplied with only a Lambda Sensor Boss. The Pre-Turbo EGT Boss is located in the Exhaust Manifold on the Turbocharger. All other EGT and Pressure Sensors are not required when removing the DPF, leaving them in the downpipe can eventually lead to sensor failure, creating a fault in the ECU and possibly a Check Engine Light in the Instrument Cluster. With the correct DPF Delete Software, these sensors are removed entirely so they can be unplugged and removed from the car. If your tuner cannot remove these faults, the sensors should be left plugged in and wrapped out of the way

    Darkside Developments accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited. It is the customers responsibility to ensure they comply with rules and laws relating to their home country

    View AllClose