Darkside 2.5" Stainless De-Cat Downpipe for VW Touareg 2.5 TDI

This 2.5" stainless steel de-cat downpipe is a straight replacement to remove the factory Catalytic Converter (CAT) on the 2.5 TDI VW Touareg

Increased performance and driveability

Made from Aircraft-grade Stainless Steel

High Flow for maximum performance

Designed and made in the UK

This Kit Consists of:

1x Two Piece De-Cat Downpipe
1x Downpipe Clamp and Gasket
1x T-Bolt Clamp

Whilst deleting the Factory Catalytic Converter, it is a good idea to delete the EGR and EGR Cooler. Please Shop EGR and EGR Cooler Delete kits here:

EGR Delete Kit:

https://www.darksidedevelopments.co.uk/products/darkside-2-5-tdi-transporter-t5-5-cylinder-egr-delete-race-pipe-for-axd-axe-blj-engines.html

EGR Cooler Delete Kit:

This Kit will fit the following Vehicles:

VW Touareg - BLK (163) BAC (174) BPE (174)

Replaces Genuine VW Part Numbers (Top Catalytic Converter):

7L6254300E - 7L6254300 E - 7L6 254 300 E
7L6254300EX - 7L6254300 EX - 7L6 254 300 EX
7L6254300K - 7L6254300 K - 7L6 254 300 K
7L6254300KX - 7L6254300 KX - 7L6 254 300 KX

Replaces Genuine VW Part Numbers (Bottom Catalytic Converter):

7L6254400G - 7L6254400 G - 7L6 254 400 G
7L6254400GX - 7L6254400 GX - 7L6 254 400 GX
7L6254400T - 7L6254400 T - 7L6 254 400 T
7L6254400TX - 7L6254400 TX - 7L6 254 400 TX

Also removes Genuine DPF Part Numbers on BPE engines:

7L6254700AX - 7L6254700 AX - 7L6 254 700 AX

Our DPF Delete Pipes are supplied with only a Lambda Sensor Boss. The Pre-Turbo EGT Boss is located in the Exhaust Manifold on the Turbocharger. All other EGT and Pressure Sensors are not required when removing the DPF, leaving them in the downpipe can eventually lead to sensor failure, creating a fault in the ECU and possibly a Check Engine Light in the Instrument Cluster. With the correct DPF Delete Software, these sensors are removed entirely so they can be unplugged and removed from the car. If your tuner cannot remove these faults, the sensors should be left plugged in and wrapped out of the way

Darkside Developments accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited. It is the customers responsibility to ensure they comply with rules and laws relating to their home country