Description
Darkside 3" Stainless DPF Delete Downpipe for BMW X5 E70 / X6 E71
This 3" Stainless Steel Downpipe DPF Delete is a straight replacement to remove the factory Diesel Particulate Filter (DPF) on the BMW X5 E70 & X6 E71This Kit Consists of:
Darkside 3" Stainless DPF Delete DownpipeDownpipe Gasket
It is rather common on these vehicles that the Downpipe Clamp becomes seized and is damaged when removing the Downpipe. If you require the Downpipe Clamp Please Shop Here:
https://www.darksidedevelopments.co.uk/products/bmw-turbo-to-downpipe-v-band-clamp-gasket.html
Series / Chassis:
E70 / E71Model:
X5 / X6Engine:
M57N2This item will fit the following Vehicles:
E70 M57N2 X5 3.0d SAVE71 M57N2 X6 30dX SAC
Replaces BMW DPF Downpipe Part Numbers:
18 30 7 812 875 - 18307812875 - 7 812 875 - 7812875
18 30 7 807 512 - 18307807512 - 7 807 512 - 7807512
18 30 0 445 327 - 18300445327 - 0 445 327 - 0445327
When buying the DPF Delete Pipe on its own you will require a custom ECU Remap to erase any fault codes or engine management lights. We will not be responsible for any problems that may occur with any other tuners software
Our DPF Delete Pipes are generally supplied with only a Lambda Sensor Boss and sometimes an EGT boss. On most models the Pre-Turbo EGT Boss is located in the Exhaust Manifold on the Turbocharger. All other EGT and Pressure Sensors are not required when removing the DPF, leaving them in the downpipe can eventually lead to sensor failure, creating a fault in the ECU and possibly a Check Engine Light in the Instrument Cluster. With the correct DPF Delete Software, these sensors are removed entirely so they can be unplugged and removed from the car. If your tuner cannot remove these faults, the sensors should be left plugged in and tied up out of the way.
Darkside Developments accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited. It is the customers responsibility to ensure they comply with rules and laws relating to their home country.
Estimated Fitting Costs
Darkside Developments offers professional in-house fitting for all products at our workshop located in Barnsley, South Yorkshire
| Estimated Labour Time (Hours) | Labour Cost |
|---|---|
| 240 | |
| For more Information or to make a booking, please CONTACT US | |
