null
Skip to main content

Darkside Primary CAT Delete Downpipe Kit for VW Touareg V10 TDI

SKU:
DSD3065
Shipping:
Calculated at Checkout
  • Darkside Primary CAT Delete Downpipe Kit for VW Touareg V10 TDI
£495.00

Description

Darkside Primary CAT Delete Downpipe Kit for VW Touareg V10 TDI

Darkside 2.5" Stainless Primary CAT Delete Downpipe Kit for VW Touareg V10 TDI

These 316L Stainless Steel CAT Delete Downpipes are a straight replacement to remove the factory Primary Catalytic Converters on the V10 TDI Touareg with the below part numbers

  • Increased performance and driveability
  • Made from Aircraft-grade Stainless Steel
  • High Flow for maximum performance
  • Designed and made in the UK
  • This Kit Consists of:

    Left Hand Side CAT Delete Downpipe
    Right Hand Side CAT Delete Downpipe
    2x Downpipe Gaskets
    2x CAT pipe to DPF pipe Gaskets
    Fitting Kit

    We also have the secondary CAT delete pipes & rear silencer delete kits listed below

    Secondary CAT Delete Pipe Kit:

    https://www.darksidedevelopments.co.uk/products/darkside-secondary-cat-delete-pipe-kit-for-early-vw-touareg-v10-tdi.html

    Rear Silencer Delete Pipe Kit:

    https://www.darksidedevelopments.co.uk/products/vw-touareg-5-0-tdi-v10-rear-silencer-delete.html

    This Kit will fit the following Vehicles:

    VW Touareg - BKW (313) AYH (313) BWF (313)

    Replaces Left Hand Side Primary Catalytic Converter Part Numbers:

    7L6254300 - 7L6 254 300
    7L6254300X - 7L6254300 X - 7L6 254 300 X
    7L6254301G - 7L6254301 G - 7L6 254 301 G
    7L6254301GX - 7L6254301 GX - 7L6 254 301 GX
    7L6254300LX - 7L6254300 LX - 7L6 254 300 LX

    Replaces Right Hand Side Primary Catalytic Converter Part Numbers:

    7L6254350 - 7L6 254 350
    7L6254350X - 7L6254350 X - 7L6 254 350 X
    7L6254350M - 7L6254350 M - 7L6 254 350 M
    7L6254350MX - 7L6254350 MX - 7L6 254 350 MX
    7L6254350GX - 7L6254350 GX - 7L6 254 350 GX

    Our DPF Delete Pipes are generally supplied with only a Lambda Sensor Boss and sometimes an EGT boss. On most models the Pre-Turbo EGT Boss is located in the Exhaust Manifold on the Turbocharger. All other EGT and Pressure Sensors are not required when removing the DPF, leaving them in the downpipe can eventually lead to sensor failure, creating a fault in the ECU and possibly a Check Engine Light in the Instrument Cluster. With the correct DPF Delete Software, these sensors are removed entirely so they can be unplugged and removed from the car. If your tuner cannot remove these faults, the sensors should be left plugged in and tied up out of the way.

    Darkside Developments accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited. It is the customers responsibility to ensure they comply with rules and laws relating to their home country.

    View Full Description Close
    SUBSCRIBE