DPF Delete Downpipe for 2.0 TDi CR Audi A4 A5 Q5 B8

This 2.5" Stainless Steel Downpipe DPF Delete is a straight replacement to remove the factory Diesel Particulate Filter (DPF) on the 2.0 TDi Audi B8 Platform Vehicles

When buying the DPF Delete Pipe on its own you will require a custom ECU Remap to erase any fault codes or engine management lights. We will not be responsible for any problems that may occur with any other tuners software

Stainless Steel

Made in the UK

This Kit will fit the following Vehicles:

Audi A4 + allroad quattro - CJCB (136) CAGB (136) CJCA (143) CAGA (143) CJCD (150) CAHB (163) CGLD (163) CAHA (170) CGLC (177)

Audi A5 - CJCB (136) CAGB (136) CJCA (143) CAGA (143) CAHB (163) CAHA (170)

Audi Q5 - CJCB (136) CAGB (136) CAGA (143) CJCA (143) CGLA (163) CAHB (163) CGLB (170) CAHA (170)

Audi A6 - CGLC (177)

Replaces VAG Part Numbers:

8K0254750M - 8K0254750 M - 8K0 254 750 M
8K0254750MX - 8K0254750 MX - 8K0 254 750 MX
8K0254750N - 8K0254750 N - 8K0 254 750 N
8K0254750NX - 8K0254750 NX - 8K0 254 750 NX
8K0254752X - 8K0254752 X - 8K0 254 752 X

Our DPF Delete Pipes are generally supplied with only a Lambda Sensor Boss and sometimes an EGT boss. On most models the Pre-Turbo EGT Boss is located in the Exhaust Manifold on the Turbocharger. All other EGT and Pressure Sensors are not required when removing the DPF, leaving them in the downpipe can eventually lead to sensor failure, creating a fault in the ECU and possibly a Check Engine Light in the Instrument Cluster. With the correct DPF Delete Software, these sensors are removed entirely so they can be unplugged and removed from the car. If your tuner cannot remove these faults, the sensors should be left plugged in and tied up out of the way.

Darkside Developments accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited. It is the customers responsibility to ensure they comply with rules and laws relating to their home country.