DPF Delete Downpipe for 3.0 V6 TDi Engine A4 / A5 B9 Platform

This 3" Stainless Steel Downpipe DPF Delete is a straight replacement to remove the factory Diesel Particulate Filter (DPF)

Increased performance and driveability

Made from Aircraft-grade Stainless Steel

High Flow for maximum performance

Includes Gaskets

Designed and made in the UK

This Kit Consists of the following:

1 x Darkside Developments Stainless DPF Delete Downpipe
1 x Gasket
1 x V-Band Sealing Ring
2 x Exhaust Nuts
1 x Cap Head Bolt

This item will fit the following Vehicles:

Audi A4 / Avant - CSWB (218) CRTC (272)

Audi A4 / S4 / Avant / quattro - CSWB (218) CRTC (272)

Audi A5 / S5 Coupe Sport - CSWB (218)

Replaces DPF Downpipe Part Numbers (these can be checked by your local Audi Dealer):

8W0254750G - 8W0254750 G - 8W0 254 750 G
8W0254750GX - 8W0254750 GX - 8W0 254 750 GX
8W0254750R - 8W0254750 R - 8W0 254 750 R
8W0254750RX - 8W0254750 RX - 8W0 254 750 RX
8W0254751DX - 8W0254751 DX - 8W0 254 751 DX

Our DPF Delete Pipes are generally supplied with only a Lambda Sensor Boss and sometimes an EGT boss. On most models the Pre-Turbo EGT Boss is located in the Exhaust Manifold on the Turbocharger. All other EGT and Pressure Sensors are not required when removing the DPF, leaving them in the downpipe can eventually lead to sensor failure, creating a fault in the ECU and possibly a Check Engine Light in the Instrument Cluster. With the correct DPF Delete Software, these sensors are removed entirely so they can be unplugged and removed from the car. If your tuner cannot remove these faults, the sensors should be left plugged in and tied up out of the way.

Darkside Developments accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited. It is the customers responsibility to ensure they comply with rules and laws relating to their home country.