Description
DPF Delete Downpipe for VW Touareg / Audi Q7 & Q8 3.0 TDI CR (2018+)
Darkside 3" Stainless DPF (Diesel Particulate Filter) Delete Downpipe for Volkswagen Touareg CR, Audi Q7 & Q8 4M 3.0 TDI V6 (2018+) This 316L Stainless Steel DPF Delete pipe is a straight replacement to remove the factory Diesel Particulate Filter (DPF) on the 3.0 V6 TDI Volkswagen Touareg CR, Audi Q7 & Q8.PLEASE NOTE:
We highly recommend that this DPF Delete pipe is only to be fitted by a professional or very experienced technician due to the complexity of the job.This Kit Consists of the following:
1x DPF Delete Pipe1x Downpipe Clamp
2x Gaskets
3x Nuts
We also have the CAT Delete Exhaust Pipe listed here:
This Kit will fit Vehicles with the following Engine Codes:
VW Touareg - DENA (286)
Audi Q7 - DHXA (286)
Audi Q8 - DHXA (286)
Replaces Genuine VAG Part Numbers:
4M0254753B - 4M0254753 B - 4M0 254 753 B
4M0254753BX - 4M0254753 BX - 4M0 254 753 BX
Our DPF Delete Pipes are generally supplied with only a Lambda Sensor Boss and sometimes an EGT boss. On most models the Pre-Turbo EGT Boss is located in the Exhaust Manifold on the Turbocharger. All other EGT and Pressure Sensors are not required when removing the DPF, leaving them in the downpipe can eventually lead to sensor failure, creating a fault in the ECU and possibly a Check Engine Light in the Instrument Cluster. With the correct DPF Delete Software, these sensors are removed entirely so they can be unplugged and removed from the car. If your tuner cannot remove these faults, the sensors should be left plugged in and tied up out of the way.
Darkside Developments accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited. It is the customers responsibility to ensure they comply with rules and laws relating to their home country.

