Mk2 Audi TT Propshaft Centre Support Bearing Carrier Upgrade

Calculated at Checkout
  • Mk2 Audi TT Propshaft Centre Support Bearing Carrier Upgrade
£246.00 - £270.00 (Inc. VAT)
£205.00 - £225.00 (Ex. VAT)


Mk2 Audi TT Propshaft Centre Support Bearing Carrier Upgrade

Upgraded Propshaft Centre Support Bearing Carrier for Mk2 Audi TT / TTS / TTRS Vehicles

The stock centre support bearing carrier is designed to reduce NVH (Noise, Vibration and Harshness) to the cabin by loosely holding the center bearing with flimsy rubber spokes. During launches and shifts, the propshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the propshaft alignment.

This upgraded unit keeps the propshaft firmly in place at all times, and its solid construction ensures it will never wear out. The thick bushings ensure the propshaft cannot move from center, maintaining propshaft alignment at all times. Isolation dampers separate the carrier frame from the body, minimizing NVH transmission.

  • Holds the propshaft where it should be
  • Isolation dampers minimize vibrations
  • Bush Options:

    Two options are available for the carrier bushings, both of which are much higher quality over the stock bushings. Close attention has been paid to the NVH (Noise, Vibration and Harshness) levels associated with this upgrade. After extensive design iterations, custom isolator bushings have been developed that separate the carrier from the body of the vehicle and mounting hardware. These carriers substantially reduce NVH levels.

    Street Bushes: These absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. With a modified exhaust or the windows down you're more than likely to never hear it.

    Track Bushes: Delivers no compromise drivetrain performance. These may create a substantial amount of cabin noise.

    Both Bushes: Not sure which is for you? Try them both, they’re interchangeable

    Installation Methods:

    Installation does not require disassembly of the propshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required.

    Please Note:

    This kit requires you to use the original propshaft bearing that is on the vehicle

    This Kit Consists of:

    Upgraded Centre Propshaft Bearing Support Holder
    Rubber Bush Kit (select from above options)
    Required Hardware

    This Kit will fit the following Vehicles:

    Audi TT / TTS Coupe / Roadster - Mk2

    Audi TTRS Coupe / Roadster - Mk2

    Fits Genuine Audi Propshaft Part Numbers:

    8J0521101AB - 8J0521101 AB - 8J0 521 101 AB
    8J0521101F - 8J0521101 F - 8J0 521 101 F
    8J0521101H - 8J0521101 H - 8J0 521 101 H
    8J0521101J - 8J0521101 J - 8J0 521 101 J
    8J0521101K - 8J0521101 K - 8J0 521 101 K
    8J0521101L - 8J0521101 L - 8J0 521 101 L
    8J0521101M - 8J0521101 M - 8J0 521 101 M
    8J0521101N - 8J0521101 N - 8J0 521 101 N
    8J0521101Q - 8J0521101 Q - 8J0 521 101 Q
    8J0521101S - 8J0521101 S - 8J0 521 101 S

    PLEASE NOTE: Not all options are currently stocked. If the item is not in stock it may take around 5 working days for the parts to be dispatched. We will email over any delays that apply.

    If you are desperate for the item, please email before ordering so we can advise you of stock

    Installation Video:

    View AllClose