The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site with all features activated.

Solenoid Injector Upgrade for Oval Port 2.0 TDI CR Engines

SKU:
DSD5500.1
Shipping:
Calculated at Checkout
  • Solenoid Injector Upgrade for Oval Port 2.0 TDI CR Engines
  • Solenoid Injector Upgrade for Oval Port 2.0 TDI CR Engines
  • Solenoid Injector Upgrade for Oval Port 2.0 TDI CR Engines
  • Solenoid Injector Upgrade for Oval Port 2.0 TDI CR Engines
  • Solenoid Injector Upgrade for Oval Port 2.0 TDI CR Engines
  • Solenoid Injector Upgrade for Oval Port 2.0 TDI CR Engines
£1,700.00

Description

Solenoid Injector Upgrade for Oval Port 2.0 TDI Common Rail CR Engines

All injectors supplied are all brand new Bosch units and Digitally Calibrated to the most extreme accuracy
These can safely take up to 200bar over the Stock 2000bar pressure

Estimated Power Capabilities:

Stock Injectors - 280bhp
-
Stage 1 - 360bhp
Stage 2 - 400bhp

These figures are the limit of the injectors. To reach these limits you will also require other supporting mods (see below)

All parts have be developed and tested on our Arosa drag car - https://www.darksidedevelopments.co.uk/arosa-mk2-2-0-16v-common-rail/

Steps to be taken when upgrading 2.0 TDI Common Rail Engines

Larger Turbo - You will need a turbo capable of the power you are trying to achieve

CP3 Fuel Pump - The stock CP4 Pumps will experience Rail Drain at around 250bhp

CP3 Fuel Pump + Cams (Stock Injectors) - To max out the stock injectors (~280bhp) you will require the CP3 Pump + Cams or Ported Head
For 280bhp+ Upgraded Injectors are Required

CP3 Fuel Pump + Ported Head + Cams + Upgraded Injectors - All these are required to achieve over 300bhp

Upgraded Cams can be found here - https://www.darksidedevelopments.co.uk/products/performance-race-camshaft-kit-for-1-6-2-0-tdi-common-rail-engines.html
CP3 Pump can be found here - https://www.darksidedevelopments.co.uk/products/cp3-fuel-pump-conversion-kit-for-2-0-common-rail-engines.html

Please Note:

Stock CP4 Fuel Pump will not work with these Injectors, this would cause Limp Mode due to low rail pressure

Upgraded Injectors will also not be effective without head work or cams, but can be installed to shorten the injection duration

These are an upgrade for all the following engine codes found in most of the VAG range:

CFFA
CFFB
CFFD
CFGB
CFGC
CFGD
CFHA
CFHB
CFHC
CFHD
CFHE
CFHF
CFJA
CFJB
CGLA
CGLB
CGLC
CGLD
CGLE
CJCA
CJCB
CJCC
CJCD
CLCA
CLCB
CLJA
CLLA
CLLB
CMFA
CMFB
CMGA
CMGB
CNEA
CNFA
CSHA

Please provide the correct VIN / Vehicle Registration Number when checking out so we can ensure you are ordering the correct part

Replaces VW Part Number:

03L 130 277 J - 03L130277 J - 03L130277J

03L 130 277 Q - 03L130277 Q - 03L130277Q

Also replaces Bosch Part Numbers:

0 445 110 646 - 0445110646

0 445 110 368 - 0445110368

0 986 435 166 - 0986435166

The ECU Software will have to be re-calibrated when fitting these injectors for a smooth idle and safe Exhaust Gas Temperatures (EGT)

View AllClose