Jetta Mk3 - 1H - 1992-1998

PowerAlign Wheel Mounting Guide Pin - PF99-512-15Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy...

Front Lower Engine Mounting Bush & Inserts - PFF85-280HPFF85-280 is a replacement bush kit that includes inserts that are designed to fit into voids in the bush, allowing tune-ability of engine movement, perfect for stiffening mounts ahead of track days...

Front Strut Top Mount - 2 x PFF85-239H({IF["VW Corrado Does not fit G60 Model. Fits VR6 (ABV) models from chassis 50_N 000 001 and all other models from chassis 50-S-000 052. Seat CordobaFits models from 1993 to 1999 with chassis numbers 6K-TR-080 001...

Rear Beam Mounting Bush - 2 x PFR85-206HSuitable for all Golf MK3 2WD models except Variant (Estate). Fits all VW Vento (1992-1998) and Corrado VR6 models (1989-1995).Diagram Reference7CompoundHeritageLocation on VehicleRearAdjustmentFixedIncluded in the...

Front Wishbone Rear Bush - 2 x PFF85-204HIf fitting this bush to Corrado (89-95), it only fits VR6 models. For non VR6 models use PFF85-203Diagram Reference2CompoundHeritageLocation on VehicleFrontAdjustmentFixedIncluded in the Kit:2 x PFF85-204H - Front...

Rear Bump Stop - 60mm x 58mm x 10.5mm - 2 x BS008BS008 is designed to fit in place of the factory rear rubber bump stopSize60mm x 58mm x 10.5mmCompoundRoad SeriesLocation on VehicleBump StopAdjustmentFixedIncluded in the Kit:2 x BS008 - Rear Bump StopTo...

Exhaust Mount - EXH007CompoundRoad SeriesLocation on VehicleExhaustAdjustmentFixedIncluded in the Kit:1 x EXH007 - Exhaust MountReplaces Part Numbers191253147A - 191253147 A - 191 253 147 A191253147A - 191253147 A - 191 253 147 ATo fit the following...

Front Wishbone Front Bush 30mm - 2 x PFF85-201HIf fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check...

Front Power Steering Rack Mount - 18.5mm wide bracket - PFF85-232This bush is suitable for vehicles with 18.5mm wide bracket and has an inner diameter of 44mmSize18.5mm wide bracketDiagram Reference9CompoundRoad SeriesLocation on...

Front Bump Stop - 54mm x 59mm x 19mm - 2 x BS006The OE dust cover fits this bump stopSize54mm x 59mm x 19mmCompoundRoad SeriesLocation on VehicleBump StopAdjustmentFixedIncluded in the Kit:2 x BS006 - Front Bump StopTo fit the following vehiclesCorrado...

Front Eye Bolt Mounting Bush 10mm - 2 x PFF85-208-10HBushes fit eye bolt mounting either side of where it passes through the wishbone. They are suitable for links with a 10mm diameter shaft which uses an M8 nut to hold the bushes in position. A lot of...

Front Anti Roll Bar Eye Bolt Bush 18mm - 2 x PFF85-209Not suitable for VR6 modelsSize18mmDiagram Reference5CompoundRoad SeriesLocation on VehicleFrontAdjustmentFixedIncluded in the Kit:2 x PFF85-209 - Front Anti Roll Bar Eye Bolt Bush 18mmReplaces Part...