Darkside 2.5" Stainless DPF Delete & EGR Delete Kit for CVCA US Spec

Darkside Developments 2.5" Stainless DPF Delete & EGR Delete Kit for CVCA US Spec Engines

This 2.5" Stainless Steel DPF & CAT Delete Downpipe and EGR Delete Kit is a straight replacement to remove the factory Diesel Particulate Filter (DPF), Factory Catalytic Converters (CAT) and factory EGR Valve (Exhaust Gas Recirculation Valve) on the USA Spec CVCA 2.0 Diesel Engines

Increased performance and driveability

Made from Aircraft-grade Stainless Steel

High Flow for maximum performance

Designed and made in the UK

THIS KIT IS ONLY SUITABLE FOR USA SPEC VEHICLES WITH THE CVCA ENGINE CODE

This Kit Consists of:

2 Piece Stainless DPF & CAT Delete Downpipe
Downpipe Clamp & Gasket
Slip Joint Exhaust Reducer with V-Band Fitting
EGR Cooler Pipe Kit
Jubilee / T-Bolt Clamps

WE CAN ALSO TUNE YOUR VEHICLE WITH EASE REMOTELY WITH OUR POWERGATE UNIT & REMOTE TUNING. FIND THE LINKS BELOW! YOU WILL FIND IN THE LISTINGS PRICING AND WHAT IS REQUIRED TO DO THIS!

POWERGATE UNIT:

https://www.darksidedevelopments.co.uk/products/darkside-powergate-3-user-unit.html

POWERGATE REMOTE TUNING:

https://www.darksidedevelopments.co.uk/products/darkside-powergate-remote-tuning.html

This Kit will fit the following Vehicles:

VW Beetle - CVCA (150)

VW Beetle Cabrio - CVCA (150)

VW Jetta - CVCA (150)

VW Novo Fusca - CVCA (150)

VW Passat / Variant - CVCA (150)

VW Vento - CVCA (150)

Replaces Genuine VW DPF Part Numbers (CVCA ONLY):

04L131606M - 04L131606 M - 04L 131 606 M
04L131606MX - 04L131606 MX - 04L 131 606 MX
04L131671QX - 04L131671 QX - 04L 131 671 QX

Replaces Genuine VW Secondary CAT Part Numbers:

1K0254308N - 1K0254308 N - 1K0 254 308 N
1K0254309C - 1K0254309 C - 1K0 254 309 C

Our DPF Delete Pipes are generally supplied with only a Lambda Sensor Boss and sometimes an EGT boss. On most models the Pre-Turbo EGT Boss is located in the Exhaust Manifold on the Turbocharger. All other EGT and Pressure Sensors are not required when removing the DPF, leaving them in the downpipe can eventually lead to sensor failure, creating a fault in the ECU and possibly a Check Engine Light in the Instrument Cluster. With the correct DPF Delete Software, these sensors are removed entirely so they can be unplugged and removed from the car. If your tuner cannot remove these faults, the sensors should be left plugged in and tied up out of the way.

Darkside Developments accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited. It is the customers responsibility to ensure they comply with rules and laws relating to their home country.