The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site with all features activated.

Darkside 3" Secondary De-Cat Exhaust for VW Amarok 3.0 TDI V6

SKU:
DSD5532.1
Shipping:
Calculated at Checkout
  • Darkside 3" Secondary De-Cat Exhaust for VW Amarok 3.0 TDI V6
  • Darkside 3" Secondary De-Cat Exhaust for VW Amarok 3.0 TDI V6
  • Darkside 3" Secondary De-Cat Exhaust for VW Amarok 3.0 TDI V6
  • Darkside 3" Secondary De-Cat Exhaust for VW Amarok 3.0 TDI V6
£200.00

Description

Darkside 3" Secondary De-Cat Downpipe for VW Amarok 3.0 TDI V6

This 3" Stainless Steel Downpipe is a straight replacement to remove the factory secondary catalytic converter (CAT) on the 3.0 TDi VW Amarok
 
This pipe only removes the second CAT (post DPF) and can be used with the stock top pipe and exhaust system

• Increased performance and driveability
• Made from Aircraft-grade Stainless Steel
• High Flow for maximum performance
• Designed and made in the UK


Downpipe also includes replacement gasket

 

To fit the following Vehicles (Engine Code can be found on a sticker on the Cam Belt Cover or in the Boot): 

VW Amarok 3.0 V6 - DDXA, DDXB, DDXC

 

OE Part reference:

Secondary CAT - 2H6 254 500 AX - 2H6254500 AX - 2H6254500AX



We also list a primary CAT and DPF Delete Downpipe and CAT-Back Exhaust System:


Primary CAT and DPF Delete Downpipe - https://www.darksidedevelopments.co.uk/products/darkside-3-dpf-cat-delete-downpipe-for-vw-amarok-3-0-tdi-v6.html

CAT-Back Exhaust System -

 

When buying the DPF Delete Pipe you will require a custom ECU Remap to erase any fault codes or engine management lights. We will not be responsible for any problems that may occur with any other tuners software

Our DPF Delete Pipes are supplied with only a Lambda Sensor Boss. The Pre-Turbo EGT Boss is located in the Exhaust Manifold on the Turbocharger. All other EGT and Pressure Sensors are not required when removing the DPF, leaving them in the downpipe can eventually lead to sensor failure, creating a fault in the ECU and possibly a Check Engine Light in the Instrument Cluster. With the correct DPF Delete Software, these sensors are removed entirely so they can be unplugged and removed from the car. If your tuner cannot remove these faults, the sensors should be left plugged in and wrapped out of the way
 

Darkside Developments accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited. It is the customers responsibility to ensure they comply with rules and laws relating to their home country

View AllClose