Darkside 3" Stainless DPF Delete Downpipe for Audi A6 C6 2.7 / 3.0 TDI

This 3" Stainless Steel DPF Delete Downpipe is a direct replacement for the factory DPF (Diesel Particulate Filter) on the Audi A6 C6 2.7 / 3.0 TDI

The Downpipe is made in house from 3" TIG Welded Stainless Steel

Increased performance and driveability

Made from Aircraft-grade Stainless Steel

High Flow for maximum performance

Designed and made in the UK

This downpipe reduces down to the stock Exhaust size to slot nicely into the standard system

This kit consists of:

3" Stainless DPF Delete Downpipe
1 x Flange Gasket

This item will fit the following Vehicles:

Audi A6 / Avant - C6 2.7 / 3.0 TDI

Audi A6 / S6 / Avant / quattro - C6 2.7 / 3.0 TDI

Audi A6 allroad quattro - C6 2.7 / 3.0 TDI

Replaces Genuine VW Part Numbers:

4F0254800H - 4F0254800 H - 4F0 254 800 H
4F0254800HX - 4F0254800 HX - 4F0 254 800 HX

When buying the DPF Delete Pipe you will require a custom ECU Remap to erase any fault codes or engine management lights. We will not be responsible for any problems that may occur with any other tuners software

Our DPF Delete Pipes are supplied with only a Lambda Sensor Boss. The Pre-Turbo EGT Boss is located in the Exhaust Manifold on the Turbocharger. All other EGT and Pressure Sensors are not required when removing the DPF, leaving them in the downpipe can eventually lead to sensor failure, creating a fault in the ECU and possibly a Check Engine Light in the Instrument Cluster. With the correct DPF Delete Software, these sensors are removed entirely so they can be unplugged and removed from the car. If your tuner cannot remove these faults, the sensors should be left plugged in and wrapped out of the way

Darkside Developments accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited. It is the customers responsibility to ensure they comply with rules and laws relating to their home country