DPF Delete Downpipe for 3.0 V6 TDi Engine A6 / A7 C7 Platform

This 3" Stainless Steel Downpipe DPF Delete is a straight replacement to remove the factory Diesel Particulate Filter (DPF)

Increased performance and driveability

Made from Aircraft-grade Stainless Steel

High Flow for maximum performance

Includes Gaskets

Designed and made in the UK

This Kit Consists of the following:

1 x Darkside Developments Stainless DPF Delete Downpipe
1 x Gasket
1 x V-Band Sealing Ring
2 x Exhaust Nuts
1 x Cap Head Bolt

This item will fit the following Vehicles:

Audi A6 / Avant - CRTF (211) CZVC (211) CZVD (211) CZVA (218) CRTE (218) CZVB (218) CRTD (272)

Audi A6 / S6 / Avant / quattro - CZVD (211) CRTF (211) CZVC (211) CZVB (218) CZVA (218) CRTE (218) CRTD (272)

Audi A6 allroad quattro - CZVF (190) CRTF (211) CZVC (211) CRTE (218) CZVA (218) CRTD (272)

Audi A7 Sportback - CZVF (190) CZVC (211) CRTF (211) CZVD (211) CZVA (218) CZVB (218) CRTE (218) CRTD (272)

Audi A7 Sportback - CZVE (190)

Replaces DPF Downpipe Part Numbers (these can be checked by your local Audi Dealer):

4G0254750L - 4G0254750 L - 4G0 254 750 L
4G0254750LX - 4G0254750 LX - 4G0 254 750 LX
4G0254750N - 4G0254750 N - 4G0 254 750 N
4G0254750NX - 4G0254750 NX - 4G0 254 750 NX
4G0254750P - 4G0254750 P - 4G0 254 750 P
4G0254750PX - 4G0254750 PX - 4G0 254 750 PX
4G0254750T - 4G0254750 T - 4G0 254 750 T
4G0254750TX - 4G0254750 TX - 4G0 254 750 TX
4G0254751BX - 4G0254751 BX - 4G0 254 751 BX
4G0254751AX - 4G0254751 AX - 4G0 254 751 AX
4G0254750S - 4G0254750 S - 4G0 254 750 S
4G0254750SX - 4G0254750 SX - 4G0 254 750 SX

Our DPF Delete Pipes are generally supplied with only a Lambda Sensor Boss and sometimes an EGT boss. On most models the Pre-Turbo EGT Boss is located in the Exhaust Manifold on the Turbocharger. All other EGT and Pressure Sensors are not required when removing the DPF, leaving them in the downpipe can eventually lead to sensor failure, creating a fault in the ECU and possibly a Check Engine Light in the Instrument Cluster. With the correct DPF Delete Software, these sensors are removed entirely so they can be unplugged and removed from the car. If your tuner cannot remove these faults, the sensors should be left plugged in and tied up out of the way.

Darkside Developments accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited. It is the customers responsibility to ensure they comply with rules and laws relating to their home country.