DPF Delete Downpipe for Porsche Panamera 3.0 TDI V6

Darkside 3" Stainless DPF Delete Downpipe for Porsche Panamera 3.0 TDI V6 Engines

This 316L Stainless Steel DPF Delete pipe is a straight replacement to remove the factory Diesel Particulate Filter (DPF) on the 3.0 V6 TDI Porsche Panamera

Increased performance and driveability

Made from Aircraft-grade Stainless Steel

High Flow for maximum performance

Designed and made in the UK

There is a + 10HP difference compared to when the vehicle has had the DPF gutted and when the vehicle is fitted with our Stainless Downpipe. Please see Dyno graph below.

This Kit Consists of:

1x DPF Delete Downpipe
1x Downpipe Gasket
3x Exhaust Nuts

This Kit will fit the following Vehicles:

Porsche Panamera

Replaces Genuine Porsche Part Numbers:

970 113 349 30 - 97011334930
970 113 349 32 - 97011334932
970 113 349 FX - 970113349FX
970 113 349 GX - 970113349GX

When buying the DPF Delete Pipe you will require a custom ECU Remap to erase any fault codes or engine management lights. We will not be responsible for any problems that may occur with any other tuners software

Our DPF Delete Pipes are generally supplied with only a Lambda Sensor Boss and sometimes an EGT boss. On most models the Pre-Turbo EGT Boss is located in the Exhaust Manifold on the Turbocharger. All other EGT and Pressure Sensors are not required when removing the DPF, leaving them in the downpipe can eventually lead to sensor failure, creating a fault in the ECU and possibly a Check Engine Light in the Instrument Cluster. With the correct DPF Delete Software, these sensors are removed entirely so they can be unplugged and removed from the car. If your tuner cannot remove these faults, the sensors should be left plugged in and tied up out of the way.

Darkside Developments accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited. It is the customers responsibility to ensure they comply with rules and laws relating to their home country.