Loading... Please wait...

DPF Delete Pipe for Audi SQ5 / A6 / A7 3.0 Bi-Turbo TDi Engine

Calculated at checkout
* Chassis Number / Reg:

(Maximum Size: . Type: )

Product Description

DPF Delete Pipe for Audi SQ5 / A6 / A7 3.0 Bi-Turbo TDi Engine
This Stainless Steel DPF Delete pipe is a straight replacement to remove the factory Diesel Particulate Filters (DPF) on the 3.0 Bi-Turbo Vehicles

  •  Increased performance and driveability
  •  Made from Aircraft-grade Stainless Steel 
  •  High Flow for maximum performance
  • Includes Gaskets 
  •  Designed and made in the UK

This will fit the following vehicles (European & USA):
Audi A6 - CGQB 313 / CVUB 326
Audi A7 - CGQB 313 / CVUB 326
Audi Q5 - CGQB, CVUC 313 / CVUB 326
Audi SQ5 - DEHA 340

To replace the following DPF Delete Part Numbers: (these can be checked by your local Audi Dealer):
4G0254800CX - 4G0254800 CX - 4G0 254 800 CX
4G0254800DX - 4G0254800 DX - 4G0 254 800 DX

When buying the DPF Delete Pipe you will require a custom ECU Remap to erase any fault codes or engine management lights. We will not be responsible for any problems that may occur with any other tuners software

Our DPF Delete Pipes are supplied with only a Lambda Sensor Boss. The Pre-Turbo EGT Boss is located in the Exhaust Manifold on the Turbocharger. All other EGT and Pressure Sensors are not required when removing the DPF, leaving them in the downpipe can eventually lead to sensor failure, creating a fault in the ECU and possibly a Check Engine Light in the Instrument Cluster. With the correct DPF Delete Software, these sensors are removed entirely so they can be unplugged and removed from the car. If your tuner cannot remove these faults, the sensors should be left plugged in and wrapped out of the way

Darkside Developments accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited. It is the customers responsibility to ensure they comply with rules and laws relating to their home country