Description
MTS Technik Coilovers (Street, Inox) for Volkswagen GOLF III (1H1)
RELIABLE AND AFFORDABLE STREET SUSPENSION FROM MTS TECHNIK Street: The Street series suspension is the default configuration of MTS Technik engineers, it guarantees a wide range of lowering and a balance between comfort and stiffness.Key Features
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Coilover springs made by Eibach, the world leader in the sport springs industry.
Stainless steel threaded shock absorbers.
Features by configuration
XMTSGWVW95 — Camber adjustable (front):
The camber plates allow the wheel angle adjustment and increase the precision of driving.
Configuration & specifications
| XMTSGWVW44 | XMTSGWVW95 | |
|---|---|---|
| Configuration | ||
| Top mounts | Stock (not included) | Camber adjustable (front) |
| Lowering (mm) | ||
| Front | 25 - 80 mm | 25 - 80 mm |
| Rear | 25 - 80 mm | 25 - 80 mm |
| Axle load (kg) | ||
| Front | -1035 kg | -1035 kg |
| Rear | -1060 kg | -1060 kg |
| Spring rates (N/mm) | ||
| Front main spring | 60 N/mm | 60 N/mm |
| Front helper spring | 20 N/mm | 20 N/mm |
| Rear main spring | 60 N/mm | 60 N/mm |
| Rear helper spring | 20 N/mm | 20 N/mm |
| Approval | ||
| TÜV | yes | no |
| Documents | ||
| Downloads | ⬇ Installation manual ⬇ Spare parts list ⬇ TÜV certificate | ⬇ Installation manual ⬇ Camber assembly manual ⬇ Spare parts list |
Notes
• Front and rear axle height adjustable (threaded shock absorber housing).• If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
• During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
This Kit will fit the following Vehicles:
Volkswagen GOLF II (19E/1G1) - 1.8 Syncro / 1.8 GTI G60 Syncro / 1.8 i Cat Syncro
Volkswagen GOLF III (1H1) - 2.9 VR6 Syncro (1HX1) / 2.0 Syncro (1HX1) / 1.9 TDI Syncro (1HX1) / 1.8 Syncro (1HX1)
Volkswagen GOLF III Variant (1H5) - 2.9 VR6 Syncro / 2.0 Syncro / 1.9 TDI Syncro / 1.8 Syncro
Volkswagen JETTA II (19E/1G2) - 1.8 Syncro
Volkswagen PASSAT B3/B4 (3A2/35I) - 2.0 Syncro / 1.8 G60 Syncro
Volkswagen PASSAT B3/B4 Variant (3A5/35I) - 2.9 VR6 Syncro / 2.0 Syncro / 1.8 G60 Syncro
MTS TECHNIK PART NUMBER:
XMTSGWVW44
XMTSGWVW95 — Camber Front