The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site with all features activated.

Sachs Race Single Mass Flywheel (SMF) and SRE Clutch kit for Audi A4 / A6 2.7 & 3.0 TDi

SKU:
DSD1313.1
Shipping:
Calculated at Checkout
  • Sachs Race Single Mass Flywheel (SMF) and SRE Clutch kit for Audi A4 / A6 2.7 & 3.0 TDi
£1,200.00

Description

Sachs Single Flywheel and Sachs SRE Uprated Clutch Kit

Fits Audi A4 / Audi A6 2.7 and 3.0 TDi 6 Speed Vehicles

This kit consists of:
SACHS 240mm Single Mass Flywheel

SACHS SRE Organic or Sintered Clutch Disc
SACHS SRE Pressure Plate
 Pressure Plate Bolts

Part Numbers:

Organic Kit - 883089 000086 / 883089000086
Sintered Kit - 883089 000087 / 883089000087

Solid Flywheel Upgrade for the Audi A4 B7 / Audi A6 2.7 and 3.0 TDi 6 Speed Vehicles

For those who require a kit suited to daily driving, the kit with an Organic disc is the strongest setup available with a stock driving style. The Sintered disc is only recommended for use on a Race or Track car due to the increased grab caused by the sintered facings, this makes driving in traffic more difficult and increases wear rate

The Organic Disc will hold ~407Ft/Lbs (530Nm) and the Sintered Disc will hold ~592Ft/Lbs+ (600Nm)

To fit the following Engine Codes (can be found on a sticker on the Cam Belt Cover or in the Boot):

Audi A4 B7 Convertible - BKN 204, ASB 232

Audi A4 B7 2.7 TDi - BSG 163, BPP 180

Audi A4 B7 3.0 TDi - BKN 204, ASB 232

Audi A6 2.7 TDi - BSG / CANB / CAND 163, BPP 180

Audi A6 3.0 TDi - ASB 232

Audi A6 3.0 TDi Allroad - ASB 232

 

This kit does give more noise and vibration in the cabin than a stock Dual Mass Kit, so please be prepared for this when ordering

 longitudinal-clutch-fitting-banner.jpg

View AllClose