Transporter T6 2.0 TDI CR DPF Delete Downpipe

Volkswagen Transporter T6 2.0 TDI Common Rail 2.5" Stainless DPF Delete Downpipe

This 2.5" Stainless Steel Downpipe DPF Delete is a straight replacement to remove the factory Diesel Particulate Filter (DPF) on the 2.0 Common Rail Engines found in the Transporter

• Increased Performance and Driveability
• Made from Aircraft-grade Stainless Steel
• High Flow for Maximum Performance
• Designed and Made in the UK

This Kit Consists of:

2 Piece DPF Delete Downpipe
1x Downpipe Gasket
2x T-Bolt Clamps

This item will fit Vehicles with the following Engine Codes:

VW Transporter T6 - CAAC (140)

Replaces Genuine VW DPF Part Numbers:

7E0254700J - 7E0254700 J - 7E0 254 700 J
7E0254700JX - 7E0254700 JX - 7E0 254 700 JX

Replaces Genuine VW Bottom Pipe Exhaust Part Numbers:

7E0253095E - 7E0253095 E - 7E0 253 095 E

Our DPF Delete Pipes are generally supplied with only a Lambda Sensor Boss and sometimes an EGT boss. On most models the Pre-Turbo EGT Boss is located in the Exhaust Manifold on the Turbocharger. All other EGT and Pressure Sensors are not required when removing the DPF, leaving them in the downpipe can eventually lead to sensor failure, creating a fault in the ECU and possibly a Check Engine Light in the Instrument Cluster. With the correct DPF Delete Software, these sensors are removed entirely so they can be unplugged and removed from the car. If your tuner cannot remove these faults, the sensors should be left plugged in and tied up out of the way.

Darkside Developments accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited. It is the customers responsibility to ensure they comply with rules and laws relating to their home country.