VW Transporter T6 2.0 TDI & BiTDI DPF & CAT Delete Downpipe

This 2.5" Stainless Steel Downpipe DPF Delete is a straight replacement to remove the factory Diesel Particulate Filter (DPF) on the 2.0 BiTDI Common Rail Engines found in the Transporter T6

This will fit both FWD and 4Motion Models

The Downpipe is made in house from TIG Welded 2.5" Stainless Steel

When buying the DPF Delete Pipe on its own you will require a custom ECU Remap to erase any fault codes or engine management lights. We will not be responsible for any problems that may occur with any other tuners software

Increased performance and driveability

Made from Aircraft-grade Stainless Steel

High Flow for maximum performance

Designed and made in the UK

See our EGR Blanking Kit for the same models:

https://www.darksidedevelopments.co.uk/products/vw-transporter-t6-2-0-bitdi-cr204-egr-delete-blanking-kit.html

This Kit will fit the following Vehicles:

Transporter T6
All 2.0 TDI / 2.0 Bi-TDI Models
CAAA / CXGA 84, CAAB / CXGB 102, CXHB 114, CXFA / CXHA 150, CXEB 204

This kit replaces the following CAT Part Numbers:

7E0254201QX - 7E0254201 QX - 7E0 254 201 QX
7E0254201MX - 7E0254201 MX - 7E0 254 201 MX
7E0254201PX - 7E0254201 PX - 7E0 254 201 PX
7E0254201S - 7E0254201 S - 7E0 254 201 S
7E0254201SX - 7E0254201 SX - 7E0 254 201 SX
7E0254201NX - 7E0254201 NX - 7E0 254 201 NX

This kit replaces the following DPF Part Numbers:

7E0254700PX - 7E0254700 PX - 7E0 254 700 PX
7E0254700T - 7E0254700 T - 7E0 254 700 T
7E0254700TX - 7E0254700 TX - 7E0 254 700 TX

Our DPF Delete Pipes are generally supplied with only a Lambda Sensor Boss and sometimes an EGT boss. On most models the Pre-Turbo EGT Boss is located in the Exhaust Manifold on the Turbocharger. All other EGT and Pressure Sensors are not required when removing the DPF, leaving them in the downpipe can eventually lead to sensor failure, creating a fault in the ECU and possibly a Check Engine Light in the Instrument Cluster. With the correct DPF Delete Software, these sensors are removed entirely so they can be unplugged and removed from the car. If your tuner cannot remove these faults, the sensors should be left plugged in and tied up out of the way.

Darkside Developments accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited. It is the customers responsibility to ensure they comply with rules and laws relating to their home country.