Q3 - 8U - 2012-2018

Rear Upper Wishbone Inner Bush - 2 x PFR85-514BLK Diagram Reference14 CompoundBlack Series Location on VehicleRear AdjustmentFixed Included in the Kit: 2 x PFR85-514BLK - Rear Upper Wishbone Inner Bush Replaces Part Numbers Fits Arm:5Q0505323D -...

Rear Anti Roll Bar Bush 21.7mm - 2 x PFR85-515-21.7 This part uses our Black Series 95 durometer material rotating ball, with our Purple 80 durometer inner cups - recommended for road based applications Size21.7mm Diagram Reference15 CompoundRoad...

Front Lower Torque Mount Small Bush - PFF3-1321 Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the...

Front Lower Torque Mount Small Bush - PFF3-1321BLK Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the...

Rear Subframe Front Mounting Bush - 2 x PFR85-827 This bush uses our Purple 80A durometer material with bonded supporting washers for strengthening and a bespoke end face design to reduce noise transmission to the cabin, whilst maintaining durability and...

Rear Subframe Front Mounting Bush - 2 x PFR85-827BLK This bush uses our Black 95A durometer material with bonded supporting washers for strengthening and a bespoke end face design to reduce noise transmission to the cabin, whilst maintaining durability...

Rear Subframe Rear Mounting Bush - 2 x PFR85-828BLK This bush uses our Black 95A durometer material with bonded supporting washers for strengthening and a bespoke end face design to reduce noise transmission to the cabin, whilst maintaining durability...

Rear Subframe Rear Mounting Bush - 2 x PFR85-828 This bush uses our Purple 80A durometer material with bonded supporting washers for strengthening and a bespoke end face design to reduce noise transmission to the cabin, whilst maintaining durability and...

PowerAlign Wheel Mounting Guide Pin - PF99-514-15 Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy...

Jacking Point Insert - PF3-1663 PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points...

Jacking Point Insert Kit of 4 - PF3-1663K PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4...