Turbochargers and Parts

Borgwarner BV40 Turbocharger for Common Rail CR140 Oval Port Engines Borgwarner replacement Turbocharger for 2.0 TDI Oval Port Diesel Engines Please Note: This will not fit models fitted with the Garrett Turbocharger from factory Genuine...

AN-10 Custom Turbo Oil Return Line This Oil Return Line will work with most Garrett and KKK / Borg Warner Turbochargers and can be cut to suit Perfect when retro-fitting a turbocharger and no off the shelf Oil Return will fit This is larger than the AN-8...

2.0 TDI Common Rail 200hp Turbo Upgrade for CKRA Engines A Custom Remap will be required immediately after fitting. We also recommend deleting the DPF at the same time as tuning. You can find link for the DPF Delete below in this listing. In order to...

Darkside Braided Oil Feed Line for 1.6 & 1.9 TD Braided Turbo Oil Feed Pipe / Line for VW Group TD Engines Fits ALL VW / Audi / Seat and Skoda Vehicles with the 1.6 and 1.9 TD Engines Designed to replace the standard hard line found on the 1.6 and 1...

Darkside Braided Oil Feed Line for 1.9 and 2.0 TDI Braided Turbo Oil Feed Pipe / Line for VW Group 1.9 / 2.0 PD / PPD TDI Engines & 2.0 CR TDI Round Port Engines Fits ALL VW / Audi / Seat and Skoda Vehicles with the 1.9 and 2.0 TDI engine codes listed...

Darkside GTB Turbo Kit for Audi B8 Platform 2.0 16v CR Engines Darkside Developments Turbo Kit for the 2.0 16v Common Rail TDI Engines found in Audi B8 Platform Vehicles This fits the Audi B8 Platform 2.0 TDi 16v Common Rail Engines with the ROUND & OVAL...

Mitsubishi Electronic / Vacuum Actuator for 2.5 TDI VW Crafter Genuine Mitsubishi Electronic Actuator for the 2.5 TDI Engine in the VW Crafter This is a direct replacement for the Standard Actuator, VW will you require you to buy a new...

Borgwarner VW Transporter CFCA Bi-Turbo Unit Borgwarner Complete Turbocharger Unit for VW Transporter CFCA Bi-Turbo Direct replacement for orignal turbocharger unit Genuine Borgwarner Surcharge: £150 Refund will be applied upon...

12mm ID Copper Washer for M12 Banjo Bolt 12mm Copper Washer, Suitable for M12 Banjo Bolt This M12 Banjo Bolt is for the engine side of the oil feed on most VAG applicaitons, however, may also be suitable for many others. Please check the thread BEFORE...

10mm ID Copper Washer for M10 Banjo Bolt 10mm Copper Washer, Suitable for M10 Banjo Bolt This M10 Banjo Bolt is for the turbo side of the oil feed on most VAG applicaitons, however, may also be suitable for many others. Please check the thread BEFORE...

M12 x 1.5 Banjo Bolt - Suitable for Oil Feed (Engine Side) M12 x 1.5 Banjo Bolt Suitable for Oil Feed Lines This M12 Banjo Bolt is for the engine side of the oil feed on most VAG applicaitons, however, may also be suitable for many others. Please check...

M10 x 1.0 Banjo Bolt - Suitable for Oil Feed (Turbo Side) M10 x 1.0 Banjo Bolt Suitable for Oil Feed Lines This M10 Banjo Bolt is for the turbo side of the oil feed on most VAG applicaitons, however, may also be suitable for many others. Please check the...