VAG

Front Wishbone Rear Bush - 23mm arm width - 2 x PFF85-410BLK If fitting this bush to A3 MK1 2WD or Seat Leon & Cupra MK1, it only fits pressed steel genuine OE arms 23mm in width Size23mm Arm Width Diagram Reference2 CompoundBlack Series Location on...

Rear Diff Front Bush Insert - PFR3-741 This is an insert to fit into the original bush to minimise the movement of the diff under acceleration Diagram Reference41 CompoundRoad Series Location on VehicleRear AdjustmentFixed Included in the Kit: 1 x...

Rear Subframe Rear Bush Insert - 2 x PFR3-733BLK This is an insert to fit into and fill the voids in the original bush Diagram Reference32 CompoundBlack Series Location on VehicleRear AdjustmentFixed Included in the Kit: 2 x PFR3-733BLK - Rear...

Rear Upper Arm Inner Bush (Pressed Arm) - 4 x PFR3-209 Fits pressed steel arms only Diagram Reference9 CompoundRoad Series Location on VehicleRear AdjustmentFixed Included in the Kit: 4 x PFR3-209 - Rear Upper Arm Inner Bush (Pressed Arm) Replaces...

Front Engine Mount Stopper Bush - PFF85-235H Diagram Reference5 CompoundHeritage Location on VehicleFront AdjustmentFixed Included in the Kit: 1 x PFF85-235H - Engine Mount Stopper Bush Replaces Part Numbers 171199339 - 171 199...

Rear Anti Roll Bar Bush 16mm - 2 x PFR3-210-16 Size16mm Diagram Reference10 CompoundRoad Series Location on VehicleRear AdjustmentFixed Included in the Kit: 2 x PFR3-210-16 - Rear Anti Roll Bar Bush 16mm Replaces Part Numbers 4B0511327 - 4B0 511...

Front Wish Bone Rear Bush - 2 x PFF85-265 Diagram Reference2 CompoundRoad Series Location on VehicleFront AdjustmentFixed Included in the Kit: 2 x PFF85-265 - Front Wish Bone Rear Bush To fit the following...

Rear Arm Inner Bush Camber Adjustable - 4 x PFR3-510GBLK These bushes offer on-car adjustment of the rear camber angles of up to 2 degrees Diagram Reference5 CompoundBlack Series Location on VehicleRear AdjustmentAdjustable Included in the Kit: 4 x...

Front Anti Roll Bar Bush 24mm - 2 x PFF85-503-24 Please check anti roll bar diameter before ordering Size24mm Diagram Reference3 CompoundRoad Series Location on VehicleFront AdjustmentFixed Included in the Kit: 2 x PFF85-503-24 - Front Anti Roll Bar...

Front Wishbone Rear Bush - 23mm arm width - 2 x PFF85-410 If fitting this bush to A3 MK1 2WD or Seat Leon & Cupra MK1, it only fits pressed steel genuine OE arms 23mm in width Size23mm Arm Width Diagram Reference2 CompoundRoad Series Location on...

Front Engine Mount Dog Bone (Motorsport) - PFF85-420BLK A small increase in NVH, usually at idle, should be expected when stiffening the connecting mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH...

Front Anti Roll Bar Bush 25mm - 2 x PFF85-803-25BLK Please check anti roll bar diameter before ordering Size25mm Diagram Reference3 CompoundBlack Series Location on VehicleFront AdjustmentFixed Included in the Kit: 2 x PFF85-803-25BLK - Front Anti...