Blog

A BIG transformation... We are now onto part 20 of our A5 Vlog and this time its having a major makeover! A full B8.5 facelift to modernise the car and a vinyl wrap in 3M Smouldering Red which was chosen by you guys on a Facebook poll. ‹ › . $( document ).ready(function() { var xhttp = new XMLHttpRequest(); xhttp.onreadystatechange = function() { if (this.readyState === 4 && this.status === 200) { var galleryImages = JSON.parse(xhttp.responseText); blueimp.Gallery(galleryImages, { contai …

Cooling is essential, especially on track! In Part 15 of this series we fit our in house developed engine and gearbox oil coolers as well as a custom larger radiator in preparation for the Nurburgring! Knowing from past track experience that cooling is vital we did not want to take any chances with this engine. The 3.0 TDIs run a 95c Thermostat from the factory, so we set about modding a brand new one to open closer to 80c, and while the front end was stripped down it made sense that all of th …

This one blog is summarising 2 Video's of our Audi A5 3.0 TDI Project! Part 14 and 14.2. Back in Part 8 we travelled over to John Sleath Race Cars to carry out a series of upgrades on our car whilst on the dyno, taking it from 228bhp - 340bhp in the same day. Since then a lot has been happening, and not just with the car... We have recently purchased our own 4WD Dyno Dynamics rolling road. This is something we have had planned for a while but when one came up at the right money we could not r …

Part 5 of our A5 BuildWe are now on to the Exhaust System. This is a common modification our customers do, both from a performance, aesthetic and acoustic perspective.A quick look at the stock exhaust, it is 65mm (~2.5") to 55mm (~2.15") and has 2 small boxes right at the back, but is still pretty quiet as the DPF is also a large silencer. It also has twin 3" Rolled Slash Cut Tips as standard. The standard grade of stainless is very poor and we see a lot of cars with rusty ex …