Description
CNC Aluminium Throttle Valve Delete for 3.0 TDI V6 Engines
This Kit Removes the Throttle Valve on the 3.0 TDI Engines The Original throttle valve acts as a 'Swirl Flap' (usually found in the Inlet Manifold), This kit removes this Valve and Swirl Flap that is in place. These are known to clog up, causing restricted flow/running issues Includes an M6 tapped hole allowing you to run a boost gauge (fittings to blank the hole and fittings for boost gauge hose also included) Includes a 1/8NPT Tapped Hole allowing you to run Water Meth Injection (includes a bung to blank this hole if not running WMI)PLEASE NOTE: ONCE THE VALVE IS REMOVED, THE VEHICLES ECU WILL NO LONGER GET A SIGNAL FROM THE THROTTLE VALVE CAUSING THE EMMISIONS WORKSHOP LIGHT TO APPEAR ON THE DASHBOARD, THEREFORE, IT WILL NEED TO BE MAPPED OUT IN THE VEHICLES SOFTWARE
This Kit Consists of:
1x CNC Aluminium Throttle Valve Delete Pipe1x M6 90 Degree Push Fit Boost Gauge Fitting
1x M6 Vented Grub Screw
1x M6 Grub Screw
1x 1/8NPT Grub Screw/Plug
Shop Water Meth Injection Kits Here:
https://www.darksidedevelopments.co.uk/products/snow-performance-stage-1-water-injection-kit.html
Shop Boost Gauges Here:
https://www.darksidedevelopments.co.uk/gauges/
This Kit will fit the following Vehicles:
All VW Amarok 3.0 TDI V6 Engines with the below Throttle Valve Part Numbers
Audi A4 / Avant - CSWB (218) CRTC (272)
Audi A4 / S4 / Avant / quattro - CSWB (218) CRTC (272)
Audi A5 / S5 Coupe Sport - CSWB (218)
Audi A6 / Avant - CRTF (211) CZVA (218) CRTE (218) CRTD (272)
Audi A6 / S6 / Avant / quattro - CRTF (211) CZVA (218) CRTE (218) CRTD (272)
Audi A6 allroad quattro - CRTF (211) CZVA (218) CRTE (218) CRTD (272)
Audi A7 Sportback - CZVF (190) CRTF (211) CZVC (211) CZVB (218) CZVA (218) CRTE (218) CRTD (272)
Audi Q7 - CZZA (218) CZZB (218) CRTE (218) CVMD (249) CUEA (258) CVZA (258) CRTC (272)
Replaces VW Part Numbers:
059129593AG - 059129593 AG - 059 129 593 AG
059129593S - 059129593 S - 059 129 593 S
059129593AL - 059129593 AL - 059 129 593 AL