Darkside DPF Delete Pipe for Audi SQ5 / A6 / A7 3.0 Bi-Turbo TDI Engine

Darkside DPF Delete Pipe for Audi SQ5 / A6 / A7 3.0 Bi-Turbo TDI Engine

Darkside 316L Stainless Steel DPF (Diesel Particulate Filter) Delete Pipe for Audi SQ5 / A6 / A7 3.0 Bi-Turbo TDI Diesel Engines

Our Stainless Steel 316L TIG Welded DPF Delete Exhaust Pipe removes the factory Diesel Particulate Filter and fits perfectly with the stock exhaust on Audi 3.0 Bi-Turbo TDI Diesel Engines.

Increased performance and driveability

Made from Aircraft-grade Stainless Steel

High Flow for maximum performance

Includes Gaskets/Fitting Kit

Designed and Manufactured in the UK

This Kit Consists of the following:

1x Stainless DPF Delete Pipe
1x Exhaust Gasket
4x M8 Bolts
4x M8 Copper Exhaust Nuts

De-Cat 3" Downpipe for Audi SQ5 / A6 / A7 3.0 Bi-Turbo TDi Engines:

https://www.darksidedevelopments.co.uk/products/de-cat-3-downpipe-for-audi-sq5-a6-a7-3-0-bi-turbo-tdi-engines.html

EGR & Cooler Delete Kit for 3.0 TDI V6 Vehicles:

https://www.darksidedevelopments.co.uk/products/egr-cooler-delete-kit-for-3-0-tdi-v6-vehicles.html

CNC Aluminium Throttle Valve Delete for Earlier 3.0 TDI V6 Engines Without Swirl Flaps:

https://www.darksidedevelopments.co.uk/products/cnc-aluminium-throttle-valve-delete-for-earlier-3-0-tdi-v6-engines-without-swirl-flaps.html

CNC Machined ASV / Anti Shudder Valve Delete for V6 3.0 TDI Engines:

https://www.darksidedevelopments.co.uk/products/cnc-machined-asv-anti-shudder-valve-delete-for-v6-3-0-tdi-engines-059145950aa-ae-af.html

This item will fit Vehicles with the following Engine Codes:

Audi A6 - CGQB 313 / CVUB 326

Audi A6 / Avant - CGQB (313) CVUA (320) CVUB (326)

Audi A6 / S6 / Avant / quattro - CGQB (313) CVUA (320) CVUB (326)

Audi A6 allroad quattro - CGQB (313) CVUA (320)

Audi A7 Sportback - CGQB (313) CVUA (320) CVUB (326)

Audi Q5 / SQ5 - CVUC (313) CGQB (313) CVUB (326) DEHA (340)

Replaces Genuine VAG Part Numbers:

4G0254800CX - 4G0254800 CX - 4G0 254 800 CX
4G0254800DX - 4G0254800 DX - 4G0 254 800 DX

When buying the DPF Delete Pipe you will require a custom ECU Remap to erase any fault codes or engine management lights. We will not be responsible for any problems that may occur with any other tuners software.

Our DPF Delete Pipes are supplied with only a Lambda Sensor Boss. The Pre-Turbo EGT Boss is located in the Exhaust Manifold on the Turbocharger. All other EGT and Pressure Sensors are not required when removing the DPF, leaving them in the downpipe can eventually lead to sensor failure, creating a fault in the ECU and possibly a Check Engine Light in the Instrument Cluster. With the correct DPF Delete Software, these sensors are removed entirely so they can be unplugged and removed from the car. If your tuner cannot remove these faults, the sensors should be left plugged in and wrapped out of the way.

Darkside Developments accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited. It is the customers responsibility to ensure they comply with rules and laws relating to their home country.