MANN + HUMMEL ProVent¹ 200 Oil Catch Can / Breather System

MANN + HUMMEL ProVent¹ 200 Oil Catch Can / Breather System

An Oil Catch Can is a popular upgrade item for minimising oil blow by in the turbo intake pipe.

In a TDI application it would go between the Crankcase Breather and Turbo Inlet Pipe to catch any oil whist maintaining the closed breather system. This will reduce the amount of oil found in your Intercooler Pipework, Turbo Housing and TIP Pipe

A mounting bracket is included with this kit, but may need to be modified + additional brackets in order to fit your vehicle. You will also require the correct size and length Oil Resistant Hose for your setup.

Highly efficient oil separation providing ideal protection for the turbocharger and other components installed downstream

Low pressure loss

Less oil consumption in comparison to less efficient separators or conventional open systems

Maintenance friendly - fittings are not removed during element maintenance

Compact design, Universal Fit

Lightweight and robust design

Integrated safety feature against irregularly high crankcase pressure

No electrical wiring required

Please Note:

Screws and bolts are not included within this kit, you will need to source these depending on where you wish to mount the catch can.

Options:

Catch Can w Filter - Provent Oil Catch can with Mann filter installated.

Replacement Filter - Replacement Catch Can Filter Only.

1x Meter 25mm Hose - 100cm / 1m of Clear Hose Only for Oil Provent Catch Can Systems

Specifications:

Standard value for use of ProVent	single unit *	up to 250 kW
Blow-by flow rate		max. 200 l/min
Installation position		vertical
Allowed tilt position of vertical axis		45° in all directions
Positioning	Inlet Outlet	12 positions, further positions on request
Ambient temperature		-35 °C to 120 °C, for a short time to 140 °C
Screw mounting to engine block		2 x M8
Material	Housing Cover Bracket	PA GF
Resistant against		diesel fuel, engine oil, lube oil, cleaning agents