Pedders 2" Lift Kit - Assembled Struts - VW Amarok 2023+ 3.0 V6

Pedders 2" Lift Kit - Assembled Struts - VW Amarok 2023+ 3.0 V6

Pedders 2" Lift Kit with Assembled Struts for Volkswagen Amarok 2023+ 3.0 V6

This lift kit is designed for Volkswagen Amarok 2023 on 3.0 V6 models, providing approximately 50mm of lift. It improves ground clearance and ride comfort while allowing for larger tyres.

This premium lift kit replaces the original suspension components to raise the vehicle by approximately 50mm, improving ground clearance and overall appearance. It is best suited to vehicles that do not regularly carry heavy loads, maintaining a comfortable ride while enhancing off-road capability.

The increased ride height allows for larger tyre fitment. Vehicles used frequently for heavy towing or constant load applications should consider heavy-duty alternatives. Additional front equipment such as winches or bull bars may affect final ride height and may require alternative spring rates.

2 Inch Suspension Lift

Improved ride comfort and vehicle stance

Increased off-road ground clearance

Pedders TrakRyder Foam Cell shocks with sintered iron pistons and 40mm bore

Premium grade steel suspension components

Includes pre-assembled Ezifit Struts, Foam Cell shocks, rear leaf springs, bushes and U bolts

Ezifit Struts pre-assembled for easy installation

2 Year / 40,000km / 25,000 mile warranty

Foam Cell Shock Technology

Foam Cell shock absorbers use a special foam saturated with oil instead of relying on pressurised gas. This design prevents aeration and cavitation, keeping damping forces stable across the full stroke. With greater oil capacity and improved heat dissipation, they resist fade, control temperature, and deliver reliable performance even under demanding use. Their durability makes them well suited for heavy-duty, towing and off-road applications.

Installation & Compatibility

Ezifit Struts are supplied pre-assembled with shock, coil spring, new top mount, bump stop and protective boot. Simply bolt them in without the need for spring compressors or re-using worn parts. The rear springs and hardware are direct replacements for factory components. A professional wheel alignment is recommended after installation for optimum tyre wear and steering response.

This kit is intended primarily for improved comfort and clearance rather than constant heavy-duty load use.

Technical Specification

• Lift amount: approximately 50mm
• Front height: 615mm hub centre to wheel arch
• Rear height: approximately 50mm higher than standard
• Shock bore size: 40mm

This Kit Consists of the following:

2x Assembled Front Shocks
2x Rear Shocks
2x Uprated Leaf Springs
4x U-Bolts
Headlight Adjuster Spacer Kit

This Kit will fit the following Vehicles:

Volkswagen Amarok - 2023+ 3.0 V6 Models (6 Cylinder)

Pedders Part Numbers:

803601
803601P
803601A
803601PA