VW Caddy Mk3 / Mk4 Van Rear Shackle Support Block Kit

These aluminium support blocks fit between the rear hangers to help reduced side to side axle movement

The blocks can be installed in a matter of minutes with the vehicle on the ground

Reduced side to side axle movement

Made in the UK

This kit will also fit Maxi and 4Motion models (with single and twin rear leaf springs)

We also offer this support kit with part of the block machined off for use with kits with 4 adjustment holes

This is for use with shackle kits that have a minimum of 4 adjustment holes on the rear hangers (Kits such as ST).
When running these kits in the middle postions, there isn't room to fit the standard block support kit, however, with the machined set it makes it possible to fit these support blocks (See Photo)

This Kit Consists of the following:

2 x Support Aluminium Blocks
2 x High Tensile Bolts
2 x Nyloc Nuts
4 x Washers

Shop our rear lowering kit here:

https://www.darksidedevelopments.co.uk/products/vw-caddy-mk3-mk4-van-rear-lowering-kit-leaf-spring-adjusters.html

PLEASE CHECK BEFORE PURCHASING:

The standard block kit will only fit vehicles fitted with a Darkside rear lowering kit. Other kits may be compatible but may depend on which height setting you are currently on, please check before ordering as you may need the MACHINED block set