A3 & S3 Mk1 4WD - 8L - 1999-2003

Front Upper Gearbox Mount Insert - PFF85-441H PFF85-441 uses our Grey70A durometer material, providing an excellent balance of strength and compliance for improved performance, whilst limiting NVH transmission into the cabin. This part is recommended for...

Front Upper Gearbox Mount Insert (Diesel) - PFF85-441RH PFF85-441R uses our softest Grey 65A material, specifically designed to minimise NVH transmission. Recommended for unmodified Diesel models or for drivers who want a subtle improvement in driving...

Front Upper Gearbox Mount Insert - PFF85-441BLK PFF85-441BLK uses our stiffest Black Series 95A material, providing a no-compromise performance option for track-focused builds. A small increase in NVH, usually at idle, should be expected when stiffening...

Front Upper Gearbox Mount Insert (Diesel) - PFF85-441R PFF85-441R uses our softest Red 65A material, specifically designed to minimise NVH transmission. Recommended for unmodified Diesel models or for drivers who want a subtle improvement in driving...

Front Upper Gearbox Mount Insert - PFF85-441 PFF85-441 uses our Yellow 70A durometer material, providing an excellent balance of strength and compliance for improved performance, whilst limiting NVH transmission into the cabin. This part is recommended...

PowerAlign Wheel Mounting Guide Pin - PF99-514-15 Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy...

Jacking Point Insert - PF3-1663 PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points...

Jacking Point Insert Kit of 4 - PF3-1663K PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4...

Handling Pack - PF3K-1002 Suitable for Petrol vehicle with Cast Wishbones only CompoundRoad Series Included in the Kit: 2 x PFF3-501 - Front Wishbone (Cast) Front Bush 45mm - 45.5mm Diameter2 x PFF3-610 - Front Wishbone (Cast) Rear Bush2 x...

Exhaust Mount - 70mm x 35mm x 11.7mm - EXH023 Size70mm x 35mm x 11.7mm CompoundRoad Series Location on VehicleExhaust AdjustmentFixed Included in the Kit: 1 x EXH023 - Exhaust Mount Replaces Part Numbers 712770470 - 712 770 4701H0253147B -...