Turbochargers and Parts

M8x20  Exhaust Studs Special VW Size Exhaust Studs - M8 Thread by 20mm to be used as Downpipe Studs Price is EACH. VW charge ~£1.20 + VAT for these Size:Long Threaded end: 20mm Short Threaded end: 10mm Overall Length: 30mm (See...

Garrett VZK Oil Return Adapter Plate Kit These fittings are to be used when retro-fitting a Garrett VZK Turbo to a VAG TDi Engine The Flange is CNC Machined from Billet AlloyThis kit includes the following:CNC Machined VZK Oil Return PlateOil Return...

OE VZK Turbocharger Fitting Kit This is the complete fitting kit which is needed when removing & re-fitting the VZK turbocharger on the later 2.7 / 3.0 TDI Audi Vehicles This kit is made up of OE / Audi Parts; 1 x Downpipe Gasket1x Oil Return...

Darkside GTB2566VK Billet Compressor Wheel Larger Billet Compressor Wheel to upgrade Garrett GTB2260VK Turbocharger into a GTB2566VK The compressor wheel is our own design to prevent surge and with extended tip technology so it flows well...

Braided Turbo Oil Feed Pipe for 1.6 & 2.0 TDI EnginesFits ALL VW / Audi / Seat and Skoda Vehicles with the 1.6 and 2.0 TDI CR Engines This kit consists of:Darkside Developments Braided Oil Feed LineBanjo Bolts and...

Brand New GTB1756VK CHRA (Center Housing Rotating Assembly) with Standard Wheel Ideal for turbocharger rebuild Balanced assembly ready to install Standard Balance - (0.65G, 0 – 90,000rpm / 2.00G, 90,000 – 132,000rpm) This CHRA...

GTB2260VK Nozzle Ring Assembly Ideal for turbocharger rebuild We can also supply the following parts for a full rebuild:GTB1756VK CHRANozzle Ring CageSteel Turbine Housing Gasket VNT Nozzle Ring BoltGTB Gas Seal Ring Compatible with the...

Darkside Oil Drain Fitting Fits Garrett Turbos with the 38mm Oil Drains Fits Garrett Turbos with the 38mm Oil Drainers Perfect for creating your own oil drain / return line to be used with a 0.5" hose Made in the UK  Overall Length -...

OE - M8 12mm Exhaust Nut (x1) Special VW Size Exhaust Nut M8 Thread with 12mm Across Flats used on the Exhaust Manifold Studs and Downpipe Studs

Darkside Alloy Turbo Inlet Pipe (TIP) for LHD Budget Turbo Kit Replacement for the Standard Plastic / Alloy TIP Pipe found on the VW Golf Mk4 Platform Vehicle. This is needed when fitting our LHD Budget Turbo Kit:https://www.darksidedevelopments.co...

Darkside Custom Alloy TIP Pipe for Ibiza / Polo / Fabia Replacement for the Standard Plastic / Alloy TIP Pipe found on the Ibiza Mk4 / VW Polo and Skoda Fabia These are 2.5" to clear the master cylinder then 80mm for the TIP To Airbox / Paper Cone Filter...

Darkside Custom Alloy TIP Pipe for Ibiza / Polo / Fabia Replacement for the Standard Plastic / Alloy TIP Pipe found on the Ibiza Mk4 / VW Polo and Skoda Fabia These are 2.5" to clear the master cylinder then 80mm for the TIP To Airbox / Paper Cone Filter...