Engine Parts

Darkside GTB2566VK Billet Compressor Wheel Larger Billet Compressor Wheel to upgrade Garrett GTB2260VK Turbocharger into a GTB2566VK The compressor wheel is our own design to prevent surge and with extended tip technology so it flows well...

Braided Turbo Oil Feed Pipe for 1.6 & 2.0 TDI EnginesFits ALL VW / Audi / Seat and Skoda Vehicles with the 1.6 and 2.0 TDI CR Engines This kit consists of:Darkside Developments Braided Oil Feed LineBanjo Bolts and...

NXS Motorsports Signature Series Manual Boost Controller These units incorporate a stainless steel spring and stainless steel ball bearing. This combination allows your engine to realize gains of up to 30 psi while being able to fine tune your desired...

Brand New GTB1756VK CHRA (Center Housing Rotating Assembly) with Standard Wheel Ideal for turbocharger rebuild Balanced assembly ready to install Standard Balance - (0.65G, 0 – 90,000rpm / 2.00G, 90,000 – 132,000rpm) This CHRA...

Brand New GTB2260VK CHRA (Center Housing Rotating Assembly) with Standard Wheel Ideal for turbocharger rebuild Balanced assembly ready to install Standard Balance - (0.65G, 0 – 90,000rpm / 2.00G, 90,000 – 132,000rpm) This CHRA assembly...

GTB2260VK Nozzle Ring Assembly Ideal for turbocharger rebuild We can also supply the following parts for a full rebuild:GTB2260VK CHRA with Billet CoreNozzle Ring CageSteel Turbine Housing Gasket VNT Nozzle Ring BoltGTB Gas Seal Ring Compatible...

GTB2260VK Nozzle Ring Assembly Ideal for turbocharger rebuild We can also supply the following parts for a full rebuild:GTB1756VK CHRANozzle Ring CageSteel Turbine Housing Gasket VNT Nozzle Ring BoltGTB Gas Seal Ring Compatible with the...

Darkside Oil Drain Fitting Fits Garrett Turbos with the 38mm Oil Drains Fits Garrett Turbos with the 38mm Oil Drainers Perfect for creating your own oil drain / return line to be used with a 0.5" hose Made in the UK  Overall Length -...

GTB2260VK Nozzle Ring Cage Ideal for turbocharger rebuild We can also supply the following parts for a full rebuild:GTB2260VK CHRA with Billet CoreNozzle Ring AssemblySteel Turbine Housing Gasket VNT Nozzle Ring BoltGTB Gas Seal Ring Compatible...

OE - M8 12mm Exhaust Nut (x1) Special VW Size Exhaust Nut M8 Thread with 12mm Across Flats used on the Exhaust Manifold Studs and Downpipe Studs

VW Turbo Downpipe V-Band Clamp and Gasket 04L253115A OE V-Band Downpipe Clamp and Gasket This Kit Consists Of: 1x OE V-Band Downpipe Clamp 1x OE Downpipe Gasket Fitment Data This Kit will fit Vehicles with the following Engine Codes: Audi A3 / S3�-...

Alloy V-Band Clamp KitThese Alloy V-Bands can be used for Intercooler Pipework, Air Intakes and Blow Off Valves This kit consists of2 x 6061-T6 CNC Machined Aluminium Flanges1 x Stainless Steel V-Band Clamp1 x Fluororubber O-Ring...