Description
Fits ALL VW / Audi / Seat and Skoda Vehicles with the PD130 Engines
- Reduces inlet air temperatures = more power
-
Prevents inlet and turbo from clogging up
- CNC Machined from a single aluminium billet
- Brushed aluminium finish
- Made in the UK
These can also be fitted to any other 1.9 TDI Engine when using a PD130/PD150 Inlet Manifold
This kit consists of:
Darkside Developments Race Pipe (51mm Diameter)
Darkside EGR Blanking Plate (for Turbo EGR Port)
2 x M8 Nuts
Vented Grub Screw (Boost Gauge Takeoff)
Grub Screw (to block Boost Port)
O-Ring Seal
Mikalor 60mm Stainless Steel Hose Clamp
PLEASE NOTE: This EGR Delete will NOT fit the PD100 / PD115, and VE Engines. The EGR Delete for these models can be found here: https://www.darksidedevelopments.co.uk/products/darkside-1-9-8v-tdi-ve-90-110-and-pd100-pd115-egr-delete-race-pipe-51mm.html
For the 1.9 PD105, this should only be used if you want to remove the EGR Valve AND ASV
On All Passat / A4 models we recommend removing the OEM rubber pipe and replacing with the EGR silicone:
https://www.darksidedevelopments.co.uk/products/darkside-51mm-2-90-degree-elbow-silicone-boost-hose.html
Please Note: Once the valve is either removed or blanked off the vehicles ECU will no longer get a signal from the EGR Valve causing the emmisions workshop light to appear on the dash board. We can remove this by reprogramming the EGR software on the ECU.
For more information on EGR Valves and Removal see here - https://www.darksidedevelopments.co.uk/egr-removal-delete/